Calling the hose gurus

[PhatRS]

I know there was someone or a couple of people who work in hosing on here and wondering if any of them are keen to make up a replacement high pressure line for the power steering for me in a suitable (1500psi+) stainless/teflon braid. Im also going to reroute the pipe too under the manifold too cos its ugly where it is now! Basically needing the fitting to attatch to the hard line at the rack end, the braided line and the m14 banjo to fit the pump end as Im using a BH remote res pump, I can do some measurements for length and stuff. Heres some random pics of more or less what i need:

Basically this but with the std size banjo on the pump end

Cheers

Jonno

[99GTB]

Interested in this also, mainly just the size of the fitting where it goes to hard lines.

[PhatRS]

Fitting sizes are m14x1.5 for the high pressure line and m16x1.5 for the return, this is at the rack tho, some models have a short hard line on both lines and I think the fittings are both m14 from that but dont quote me there.

Coupla informative...ish threads on it:

http://bbs.22b.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=11;t=000673

http://forums.nasioc.com/forums/showthread.php?t=1225267&highlight=braided+power+steering

[BC5RA]

Boostcut should be able to sort you out.

Swing him a PM.

[PhatRS]

Nice one, will do. Cheers