sti v9 hard to start

[embai]

Hi guys,

i just recently got myself the 1.3U cable to do some datalogging

had been trying to fix the hard start problem i had with my car,

it is just hard to start when cold. been to the garage and scan for codes,

everything was fine, instead of spending $$ for the dealer telling me everything was fine

, i decided to do some datalogging instead.

one thing i noticed is i did an ecu reset with the ecuexplorer, the car start right up the first

time, no problem at all.. after that it will be the same symptom again. with datalogging, can anyone shed some light on what values on some of the stuff/ sensor should be ?

any help will be greatly appreciated

[Pappu1]

how abt get a v9 sti map and reflash it in the ecu and see if solves issue

(just in case someone did a change b4 u got car?)

if still issues perhaps make sure everyting is in place like hoses all tight and not leaking etc - justa a starting point

[sti_v9]

I use to datalog my V9 when I had it. If you want, you can email me your logs and I will have a look. Been a while since I had the STi but you never know, I might notice something. Also, I can send you some of my logs, mainly 3rd gear pulls and you can see how they compare to yours.

PM your email address if you're keen.

[Pappu1]

sti_v9 - have u got a copy of ur v9 sti ROM?

[sti_v9]

 pappu said:

sti_v9 - have u got a copy of ur v9 sti ROM?

Yep, I have the stock ROM and a couple of other ROMs as well, S202, S203 and a few more. PM your email address and I will forward them.