Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

DOUBLE HELP! NOW I'M STUCK AT WORK


Guest

Recommended Posts

Not the greatest way that I wanted to meet you all or the best first impression, I started the stutter thread but now this.

Now its screwed, I just went to leave and it went from idling normally to below 1000rpm.... back up again so I gave it some reves fine..... went to reverse... started to die.... now it idles below 1000rpm ready to die now it wont idle at all and any gas applied only chokes it.

I'm stuck on the ground level carpark under ground.

Man, just when things were going sweet........ dammit.

Link to comment
Share on other sites

Central Auckland AA building :(

edit: CBD

I checked and I dont even have the tools to try and reset the ECU to see if that would work.

Link to comment
Share on other sites

Thanks heaps man,

I'm in the office waiting for the AA to call no mobile on me so I'm stuck here.

Will I be able to drive home like that if it works? approx 6 Km's city stop/start at lights

Man, I was meant to be driving my girl and the kids down the line after work. better here than there I guess.

Cheers

Link to comment
Share on other sites

Guest boostcut

i know its late and all probly already fixed but have you thourght about fuel pump???

mite be making fuck all pressure but just enuf to run ya know???

Link to comment
Share on other sites

Thanks man, I'll be checking that.

By the time the AA showed, my building access had been revoked so I couldn't get back in :-[ so I'm here now wainting again. Have reset the ECU in the mean time. Havnt run diagnostics as of yet. Will wait for the AA.

No probs with the AA though, it was a busy night and the guy was cool enough to give me a ride home.

Link to comment
Share on other sites

Thanks for your help guys. It was the Fuel Pump. Nothing there whatsoever.....dead.

should be an easy fix?

If any of you can help with a replacement it would be much appreciated. Pref very good working order sec hand.

PM me or reply to the WTB classified that I'm starting.

Cheers

Link to comment
Share on other sites

sorry to read about your problem. same thing happened to me on the way to work last week. i managed to source a second-hand fuelpump from strong brothers subaru wreckers in onehunga cost me about $170 incl g.s.t with six month warranty this was for the complete unit and it just dropped in place of the old one! took about an hour doin'it myself.repco charges $235. form just the pump unit. of course theirs are new so that may be a factor .

Link to comment
Share on other sites

Nice bro thanks!

Not good to hear about the issue but good to hear that it is an easy fix. I have read up and will look at doing it myself as seem straight forward. Was planning on just getting a sechand pump unit but $170 for the complete unit incl warranty sounds very reasonable.

Thanks again for the heads up mate. I'll look into the strong brothers option also.

Link to comment
Share on other sites

Guest boostcut

if your planning on modifying your engine? id be considering a walbro pump as you can get good deals on the net for them. atleast then you know you have a new pump and its already upgraded to flow enough for some big boost

Link to comment
Share on other sites

True that, I have future mods in mind but not until I get a reasonable fresh engine as this one is pushing 190kms

Putting money into the setup and ride first while I wait for that to happen.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...