Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Urgent Help with V7 data connector and ecu codes


gtlegacy

Recommended Posts

first off i have just converted my friends v7 wrx NA to turbo and manual

and have these codes but am unfamiliar with the obdII cars

I need some one to please if they have a v7 wrx to pull out the data connector plug (have 2 bits to push in on the inside behind plastic and it pops out it sits in the plastic directly under the steering wheel) can they please tell me the colours and the pins where each wire goes the back of the plaug is marked 1 and 8 and 9 and 16

thanks

I have checked the codes using the 2 black connectors and tried to reset running up to around 40km with green and black but wouldnt reset not sure if codes are the same or not just wanted to ask as i dont have a select monitor or scanner yet

codes were

4 long 2 short 42

10 long 6 short 106?

1 long 13 short 113?

im thinking one of these is possibly the speedo as i does not work at the moment

can anyone help

Link to comment
Share on other sites

Ok have the wiring for you. It makes it slightly confusing in that there are 2 sets of wires that appear to be the same colour. Maybe if you have the tape and conduit taken back there might be other markings.

In 2 rows of 8

Top Row

1: Black wire, red trace, and appeared to be a silver marking

2: blank

3: blank

4: Brown wire, white trace

5: Light green wire, red trace

6: Red wire, white trace

7: blank

8: Black wire, red trace

Bottom Row

9: blank

10: light green wire, black trace

11: blank

12: green wire, white trace

13: green wire, white trace, appeared to be a silver marking

14: blank

15: blank

16: blank

Hope that helps you out, I have taken a few pics which I'll put up, might also help

obd-01.jpg

obd-02.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.6k
    Total Posts


×
×
  • Create New...