blow off valve?

[Guest]

blow off valve sucking air in though little hole on side y??

is it fucked?

[nztintin]

yes, should seal when under vac AFAIK

[Pappu1]

wat little hole ???

[Guest]

its on a type rs blow off valve.

so its buggerd then

[marc]

diaphram or piston seal most likely leaking on the valve. thats what causes that. Yep valves over or midas well be lol

[Guest]

Its what all those Greddy BOVs do. Geninine and copy. I'm assuming your talking about the small holle on the back of the BOV thats angled down?

[mattapo]

yea a lot of bov's open under vac and stay open now days

[Guest]

Heheh, my BOV got swiped over Christmas while I was away on holiday (yay, thanks for that!) Only have the factory valves, but I didn't have the hose to plumb it back, got sick of it leaking like a sieve so I cut the valve open, drilled and tapped a hole in the top, stretched the spring a bit, added a screw and a 20c coin, siliconed and wired it back together. Sounds like sh*te, but it works right nice. =)

- Si

[ADIKT]

 MadSi said:

Heheh, my BOV got swiped over Christmas while I was away on holiday (yay, thanks for that!) Only have the factory valves, but I didn't have the hose to plumb it back, got sick of it leaking like a sieve so I cut the valve open, drilled and tapped a hole in the top, stretched the spring a bit, added a screw and a 20c coin, siliconed and wired it back together. Sounds like sh*te, but it works right nice. =)

- Si

Kiwi ingenuity?

[Joker]

pure win!