Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

2002 gtb e-tune questions


Ryanh

Recommended Posts

Hi, just some q\'s

1. Rough price to replace front inner cv boots?

2. I have a blitz id sbc. Car is unmodified mt, and was just wondering what optimum psi was and other settings for it?

3. I also hace a apexi Safc2. Dont have a clue about that. Anyone know how i should set that?

4. How do i know if my map sendor is ok? Is there a diagnostic tool for this?

5. I have just got this car. Should i reset the ecu? If so, how to reset?

6. What is upper engine cleaner used for? Is it just cosmetic? Should i use it anywhere since ive just got the car?

7. What is ecu reflashing? And how much does it cost roughly?

Link to comment
Share on other sites

I can answer a few of your questions

You probably dont need to reset your ECU unless it has issues

Subaru Upper Engine Cleaner is used for cleaning inside the bores and inside your manifold can stop knocking and improve fuel economy - I persoanlly put a can through any subaru I buy

an ECU reflash basicly tunes your ECU to run better on our fuel - or get more power

Others may be able to help with your other Qs or state if I\'m wrong with any of my answers - good luck with your car dude!! :)

Link to comment
Share on other sites

1. Rough price to replace front inner cv boots?

Pass

2. I have a blitz id sbc. Car is unmodified mt, and was just wondering what optimum psi was and other settings for it?

Sell it, use money for option 7. To be honest the E-Tunes seem to det badly enough at stock boost you\'d be playing with fire raising it up.

3. I also hace a apexi Safc2. Dont have a clue about that. Anyone know how i should set that?

Same as above - sell it use money for reflash.

4. How do i know if my map sendor is ok? Is there a diagnostic tool for this?

It has one, but it\'s only used for keeping an eye on the turbo switchover - the car uses a MAF not a MAP sensor - you could check with a multimeter if it\'s working though

5. I have just got this car. Should i reset the ecu? If so, how to reset?

Sure, does no harm - easiest way is to just unplug the battery for a few minutes - if that\'s a pain you can reset it via the green an black plugs under the dash (i forget which ones do what... 30 sec on google will tell you). Can\'t hurt anything.

6. What is upper engine cleaner used for? Is it just cosmetic? Should i use it anywhere since ive just got the car?

It cleans the inside of the intake and cylinders etc out - follow the directions on the can, yes it is even recommended by subaru as part of their normal servicing

7. What is ecu reflashing? And how much does it cost roughly?

It is what used to be called "chipping" an ECU - they call it mapping in the UK - optimising fuel ign boost to get more power/mileage etc. You can sell the boost controller and SAFC as they are piggyback devices trying to achieve the same thing. Cost budget around $1200 as a ballpark - best to be done after you have done anything else planned (larger exhaust etc)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.6k
    Total Posts


×
×
  • Create New...