Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Alarm issues


FST4RD

Recommended Posts

So I replaced the MAF and fuel pump in my V6 GF8 WRX. Now randomly the alarm goes off.

I've checked the door sensors and they seem to be fine, I've taken the battery out of the remote and that makes no difference, the boot seems fine as in you open and close and the light goes on and off.

The plunger sensor thing under the bonnet was a bit rusty so I cut it out.

Anyone have any ideas?

Link to comment
Share on other sites

Well I cut the wire and earthed it and the alarmed beeped like I had left something open, so I didn't earth it and it armed properly... So I don't think it's that.

I'll check the boot again soon as that's where I spent my time changing the fuel pump over. Could have knocked something I guess.

Link to comment
Share on other sites

  • Admin
 FST4RD said:
Well I cut the wire and earthed it and the alarmed beeped like I had left something open, so I didn't earth it and it armed properly... So I don't think it's that.

I'll check the boot again soon as that's where I spent my time changing the fuel pump over. Could have knocked something I guess.

I'm a little bit surprised you can't work this out.

The bonnet switch earths when you open the bonnet and triggers the alarm to go off (or makes it think the bonnet is open when you arm it). When the bonnet is shut it's open circuit.

So by being super clever and removing a really, really important part of your alarm you've caused the issue.....

Edited by boon
Link to comment
Share on other sites

It was doing it before I took out that switch, I only took the switch out because it was all rusted up and a bit dodgy. In getting a new one today,

But by cutting the switch off and not having it earthed the alarm will think the bonnet is closed regardless and should act normally.

Link to comment
Share on other sites

  • Admin
 FST4RD said:
But by cutting the switch off and not having it earthed the alarm will think the bonnet is closed regardless and should act normally.

Correct, is that not the case for you? Your previous post made it sound like that's what's happening.

Link to comment
Share on other sites

No what I meant and I didn't make it clear, was that after I had done the work on my car the alarm started playing up. I cut the switch out as it was rusty and looked a bit dodgy but the alarm is still randomly going off. So I can safely rule that out as an option.

I've also ruled out both remotes as well, the batteries and buttons are all good.

I'll remove each door sensor and check them thouroughly next I think as well as the sensor on the boot.

Just wondering if there is something else I need to check?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...