Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

safe mode..


WRXTAC

Recommended Posts

Hey guys, my v2 wrx wagon has been running 7 psi for a while now instead of the usual 10 psi.. i have reset my ecu, and there were no codes. after reset the problem was fixed but only for a very short time. it ran 10psi for a short time before going back to 7. Anyone got any ideas as to why it might be going into safe mode straight away?

Link to comment
Share on other sites

Guest boostin

Detonation most probably, the knock sensor will be picking up knock and pulling boost and timing.

What fuel are you running in it??

Link to comment
Share on other sites

Guest boostin

Get some upper engine cleaner from Subaru. Its probably all carbon'd up. That will increase compression making it more prone to knock, and the carbon heats up and causes det by early ignition of the fuel.

Wingers sell it on Trade Me.

http://www.trademe.co.nz/Browse/Listing.aspx?id=258672236

It can't hurt to try it. It does smoke a lot though, so do it on a windy day. And keep the house windows and doors closed.

Link to comment
Share on other sites

  • Admin

Mines been doing the same thing. droping back from 15psi down to around 9psi, ECU reset fixed it untill i boosted properly again then back into safe mode.

I thought it was because i was forced to use 95 at one stage, but its been running on 98 for the last 4 tanks and still droping into safe mode...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...