94 Leone

even with washers the lateral forces on the bolt would still cause it to pop the bushing out under hard cornering. It is the wrong kind of link for these arms.

I'd check the dash itself, or test the earths to the dash plugs. Could be dry/cracked solder too.

why for so obsequious friend?

Definition of fawn intransitive verb 1 : to show affection —used especially of a dog The dog was fawning on its master. 2 : to court favor by a cringing or flattering manner courtiers fawning on the king

yeah, I realised. But had to juggle monies at the time. so to ensure the trackday happened. Paid for that.

I don't believe anyone's received anything as of yet. Don't panic. Just make sure you have cotton Overalls, and a motorsports orientated helmet, no jandals. most importantly; bring a smile. For the form, usually (atleast with the NZDRA events ive been in) The indemnity form is signed at the time of scrutineering. may differ with playday.

Taken along my way back, stopped at the look out on the Cuppa Tea coast

Just bring some oldschool kool to megameet so I can Fawn!

Model: 04 V9 STi -220.7kW ATW Displacement: 2L Mods: Full silicone intake w/ CAB & Blitz LM filter, 3mm thermal mani spacers, 3" RAGE exhaust, DW300 fuel pump, Link 3 port BCS. Fuel: BP 98 Tuner/dyno: Chris@ Prestige Tuning, Dynapack

Tune dialled in at 220.7kw pretty happy tbh

That is what I like to hear. I hadn't heard anything bad and that he's good with scoobs so, figured go for it.

Don't tell me the day before the tune he blows things up? haha know of a lad I got my lip off took his v8 sti there and made 225kw on 22psi bp98. seemed reasonable.

Prestige tuning & motorsport in lower Hutt. used to work with Andre at STM from what I've heard. Will post Dyno sheets. 👌

Well, got sick of my wireless phone charger dock not consistently charging the phone with it plugged in to the back of the head unit, so I soldered up some wires to a 12V USB car charger and stole the wires from the cigarette lighter light and hooked it up to that. Then I accidentally broke the knob on the drivers side Air vent, soo- I put the boost gauge in the vent. Also discovered that My spare wheel- which was a full size wheel, I hadn't bothered having a proper look... Turns out it was a curbed up GTB Rim with a flat, and chunks missing from the sidewall....., so 5x100, poked and flat tyre.. Made a weight reduction- cos I got to throw it in the skip bin. Tune tomorrow

yeah, It's possible, everything lines up manifolds etc. etc.. but it's sohc and it has the early style cambelt tensioner- beware of that. a good option would be to get some heads from a turbo model as they have dohc, and the necessary water and oil feeds for the turbo setup. in saying that. If you got a journal bearing turbo like a holset or TD04/05 it doesn't need watercooling. which saves effort.

Since I am not a total Caring Understanding Nineties Type. It's along the main drag that goes through Upper Hutt. That should make it easy enough for someone to carry on the game.

reload page should be there now.

I had to use some unorthodox means to get to this... I'll give you a clue for this one, great coffee is very near.

A big puzzle of parts that slowly self destruct and make me feel good.

The bonus with the design of the ball joint style, is the forces exerted on it will not be skewed, the spacer design will put vertical and lateral stresses against the bolt, and create weak points in the bushing, the ball joints rotate in all lateral and vertical directions, creating an even distribution of force against it, less likely to break anything or pop the bushing out either..

I think so. Or a turd rolled in glitter. I'm 50:50 at this point.

wrong! You get wank factor with whiteline.

To be fair I played with the colour a little and it wasn't that purple IRL, but yes- the wheels are spinning.

TBH, most of the cars at 4nR were vomit, this one seriously stood out to me.

if it was a bottom one; yeah, if a top one- you should be alright to just remove all the battery and water reservoir stuff. I removed a camshaft with engine in place once, so like it all depends how committed you are to being too lazy to pull the engine.