engine conversion

[mattapo]

it would be more likely that a rs/v1/2 or bg/d5a could be made to work together but still unlikely

[rex-leggy]

 Mattapo said:

it would be more likely that a rs/v1/2 or bg/d5a could be made to work together but still unlikely

thats still alot of wires as lol

[Koom]

 rex-leggy']

[quote name='Mattapo said:

it would be more likely that a rs/v1/2 or bg/d5a could be made to work together but still unlikely

/quote]

thats still alot of wires as lol

Yep, about the same 80% of the pins to switch over.

[subout]

pmd you koom, and ive said im just going by what been told.

It could be 100% wrong, but im sure koom will let us know soon.

But on the other side i am going to be selling a G4 wire in soon if you needed one to make things easier

[Koom]

Cheers for the diagram Subout. They have just linked up the ignition outputs so that it can also run the four coils on a GTB or the two coils on an STI. Plus linked up the relevant earths. So it'll work as a plug-in for a "b" series BG5/BD5.

Those with the first TT iteration (BG5a/BD5a) are still stuck with having to re-pin everything.

Thanks again for your help with getting this all clear.