6 speed into a TT BG5 (Help)

[TRICKS]

I have a few projects going on, for my partners BH5 we are dropping a STi ver 5 into it, will do the manual side of things first and shall pick a few more brains here over ecu things as Im not converting the stock BH5 to ST so wont use the non sti ecu...

2nd project before I do a conversion on BG5B Legacy wagon was to install a 6 speed (my clutch is due anyway) wondering if anyone may of done this before or if anyone foresee's and problems,

Parts wise I have everything but the auto drive shaft

I will use the brembos, rear diff, 6speed slave cylinder, 6speed clutch, 6speed fly wheel, 6speed starter etc

One question is about the brembo calipers and Subaru 4pots are they the same offset... as I have CSA rims that clear my 4 pots on the GTB, i am hoping to reuse them on the brembo, just not 100% sure Thanks

[DacerX]

Doubt rims will clear bro, and there have been a few people that have done this in the bg wagons

[Codex]

From what I've read the 6 speed bolts up but the centre dif control doesn't plug into anything so will run constant 50 50

Should be fine apart from that

[TRICKS]

 Codex']

From what I've read the 6 speed bolts up but the centre dif control doesn't plug into anything so will run constant 50 50

Should be fine apart from that

will that be a problem, can anyone share some insight on this, whether i can mod it to work, if its needed. any info and links will be appreciated.

[quote name='dacerx said:

Doubt rims will clear bro, and there have been a few people that have done this in the bg wagons

I do have some v7 Rims just hoped to use the other model .. but thanks

[DacerX]

centre diff control is only a thing if u have dccd and thats doubtful

[TRICKS]

 dacerx said:

centre diff control is only a thing if u have dccd and thats doubtful

non dccd 6 speed ... thanks

[madmike]

No DCCD.. No problem then.

Centre diff Runs just like any other subaru gearbox.