BOV help for 1994 GC8 EJ20 WRX Sedan

[Rosssub]

Your low idle and stalling is most likely a vac leak. There\'s a hole somewhere...

Edit: Put your OEM BOV back on and see if the idle sorts out, then you know the problem is the new BOV or new BOV pipe work leaking.

[slystiguy]

Mine currently has a cork an hose clip blocking the hole haha

[Benj]

 Rosssub said:

Your low idle and stalling is most likely a vac leak. There\'s a hole somewhere...

Edit: Put your OEM BOV back on and see if the idle sorts out, then you know the problem is the new BOV or new BOV pipe work leaking.

Yup okay ill do that, do you think it could be the rubber bung i have put in the recirc valve? like letting air through because it heats up?

[Rosssub]

 Benj said:

Yup okay ill do that, do you think it could be the rubber bung i have put in the recirc valve? like letting air through because it heats up?

Load a pic of your bung (lol). As long as it seals it\'ll be sweet, no pressure there.

[Benj]

 Rosssub']

[quote name='Benj said:

Yup okay ill do that, do you think it could be the rubber bung i have put in the recirc valve? like letting air through because it heats up?

/quote]

Load a pic of your bung (lol). As long as it seals it\'ll be sweet, no pressure there.

Haha, nah man i think i have fixed the problem! (its not leaking) i decided that maybe if i cant blow through it the pressure still might be able to blow it through (leak) and so I decided to strengthen it and it worked so far.

[Rosssub]

Nice, so it was just the new BOV needed adjusting?

[Benj]

 Rosssub said:

Nice, so it was just the new BOV needed adjusting?

Yeah so far so good, should have been the first thing i altered but my hoses were like shitty so I thought it was them. But allgoods, thanks for the help man.

[Rosssub]

;D

No worries, good you got it sorted.