Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Amps - any installers in palmy?


inzid

Recommended Posts

Hi guys,

I have a rockford fosgate P1 Punch Sub and im looking at getting two new amps under the seats. 1 to power the speakers and the other to power the amp.

I have another amp at the moment which i believe is the same as this amp (will check tomorrow)

http://www.ebay.com/itm/Earthquake-Sound-T2000WD-1-2000W-Digital-Monoblock-TNT-Car-Amplifier-Amp-/360881893672

I was going to use the earthquake amp to power my speakers (infinity speakers) but i dont know if I should just sell it and buy a new one to do this job.

My questions are

1. Should I buy two new amps - 1. for speakers and the other for sub?

2. Should I buy one new amp and keep the earthquake amp and use the earthquake to power speakers - new amp to power the sub

3. If option 2 is the best idea what amp should I get?

Also is there anyone who can do a tidy job on installs here? Dont mind paying I just dont want to pay a huge amount of money at actual installer shops.

Thanks

Link to comment
Share on other sites

That amp is a Mono amp, so it\'s not designed to run speakers off. That is designed to run subwoofers.

Is your sub Single or Dual Voice Coil? Are the Voice Coil (s) 2 or 4ohms? These are important questions when looking at amps and power ratings.

That amp would work just fine, if your sub is either an SVC 2- or 4-ohm, or a DVC 4-ohm, but not so good if it\'s a DVC 2-ohm, as it\'s not rated for a 1-ohm load.

If that amp would work, then I\'d suggest keeping that for your sub and getting a smaller 2-channel amp for your front stage.

I could install it quite easily, but it would take pretty much a whole day, and I\'m in Wellington.

Link to comment
Share on other sites

to be honest I dont know what my sub is. Is there anyway to find out?

I believe it could be this as I bought it from Triple SSS and this is the only P1 sub I can find

http://www.sss.net.nz/index.php?route=product/product&path=59_64&product_id=70

Also Scoobydoo you say the amp would work fine what one are you talking about? the prime amp? or my earthquake?

The problem im having now is since i got it installed (the sub and amp) it keeps turning off once the cars off. The guy at Triple SSS (Palmy) said it doesnt have enough power but it worked perfect in my old car so i dont know who to believe.

I wouldnt care if I had to come to Welly. I wouldnt mind keeping in contact with you Scoobydoo as Im heading down that way soon so I could save up - Purchase what you think would make the car and sounds sound amazing and then we could work on it for a day (if thats fine with you)

Obviously willing to take any other advice or any installers are the Palmy area.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...