Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Recommended Posts

Posted

So I bought a set of springs and struts off trade me, the auction said 03 so I thought sweet will fit into my 03 bp no sweat. Then I released they were 03 be/b4 and I'm not sure they will fit?

 

Any ideas?

Posted
9 hours ago, iludez said:
16 hours ago, sobanoodle said:
Swap tophats over. 

Awesome cheers!

Rears will fit without swapping top hats, but yea fronts will need bp top hats 

Posted
Rears will fit without swapping top hats, but yea fronts will need bp top hats 
Cheers guys can't beat a set for 40 dollars haha
  • 2 weeks later...
  • 3 months later...
Posted

Just bumping this slightly so bh5 springs won't fit bl/bp shocks correct?
There is a set of bh5 springs and shocks I would like to buy, would the whole lot swap over or do I still need to swap front top hats?

Posted
22 minutes ago, sobanoodle said:

They will. Hard to say what it's gonna look like as spring ratings will be different between the two. Might end up with a saggy bottom or the opposite.

 

Not sure if this helps, but had a quick look at what MCA say for springs on BE/BH vs BL/BP Legacy's, and they're the same spring rates.

One thing to take note of is that BL/BP Legacy's have less travel in their front suspension due to their front inner rear bushing being vertical, rather than horizontal like on the BE/BH.

Posted

Those are adjustable suspension springs aren't they? A bit different the way I see it. 

 

If you look a part list for STI pinks they have a whole bunch of different part numbers: sedan/wagon, 3.0/GT, 5AT/6MT etc.

Posted
37 minutes ago, sobanoodle said:

Those are adjustable suspension springs aren't they? A bit different the way I see it. 

 

If you look a part list for STI pinks they have a whole bunch of different part numbers: sedan/wagon, 3.0/GT, 5AT/6MT etc.

 

Yeah true. But the fact they list the same spring rates for 3rd/4th gens says that you could probably get away with running either in either.

Posted
2 minutes ago, Individualities said:

 

Yeah true. But the fact they list the same spring rates for 3rd/4th gens says that you could probably get away with running either in either.

 

You get away with the same rated springs in adjustables because you can control the height, do not see the same happening with the fixed perch struts.

 

  • Like 1
Posted
 
You get away with the same rated springs in adjustables because you can control the height, do not see the same happening with the fixed perch struts.
 
So the bh5 should just bolt in sweet?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • Joker  »  Rosssub

      RIP Ross
      · 0 replies
    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 1 reply
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    41.1k
    Total Topics
    574.8k
    Total Posts


×
×
  • Create New...