Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Roger Clark Motorsport The Gobstopper


Recommended Posts

800+ BHP, go the little 2.0

Gobstopper Specs:

Power = 850 bhp

Weight = 1120 kgs

Intended use: street/track/hill climbs/drag strip/time attack

Body

WRC steel arches WRC front and rear bumpers

WRC carbon rear spoiler

FIA T45 multi point welded in roll cage

STi alloy bonnet with RCMS heat extraction vents and gas struts

Heated front screen

WRC non heated lightweight rear screen

Engine

2.0Litre closed deck subaru block

RCMS extreme arrow rods

RCMS 75mm steel crankshaft

RCMS omega flat top pistons (coated) compression ratio 9.5:1

V4 STi cylinder heads with WRC/RCMS O-ring head gaskets and gas rings

One piece Nimonic exhaust valves

One piece stainless inlet valves

RCMS uprated valve springs

Plasma nitrided titanium spring caps

WRC main and big end bearings

WRC R-Profile high wrap cam belt system

RCMS modified oil pump to suit R-Profile belt

WRC S10 inlet manifold

RCMS eight injector kit

RCMS 72mm throttle body

RCMS 5.5 litre alloy sump

WRC short runner exhaust manifold

Garret GT 35-40 turbo with speed sensor

K&N air filter with RCMS 100mm inlet trumpet

RCMS high flow intercooler with twin tube core

70mm stainless steel intercooler pipe work

Electronics

M800 Motec ECU with traction control,nitrous control,anti-lag

paddle shift control,and full engine management control and data login

Motec dash with data login

Defi gauges for turbo,oil,fuel pressure

Interior

FIA carbon kevlar Recaro seats

FIA Sabelt 6-point harness

Transmission

R180 STi rear axle 3.9:1 cwp and plated Modena LSD differential

GKN rally drive shafts front and rear

Torque line carbon fibre propshaft

Six speed subaru gearbox casing modified for sequential housing

Six speed Modena gear kit

Subaru 3.9:1 front cwp

RCMS sequential system

RCMS paddle shift system

Plated centre diff with 1:1 uprated output Modena gears

Plated front Modena differential

Fuel System

FIA spec 26 litre rubber/kevlar bag tank in aluminium cover

Twin Bosch fuel pumps (200 litre per pump)

-8 Goodrich fuel feed pipe

-6 Goodrich fuel return pipe

-6 fuel cooler with cooling fan on return

RCMS 8 injector distribution block

2x SX fuel regulators running at 4 bar static pressure

Suspension

WRC spec EXE-TC fully adjustable dampers

High and low speed bump + rebound adjustment

STi Rose jointed rear lateral links

STi Rose jointed rear trailing links

EXE-TC bottom rose jointed upright bushes

STi alloy front arms (polished)

STi quick-steer steering rack

Other

WRC roller bearing single piece steering column

Momo suede steering wheel

Nitrous

NX full wet system

121bs carbon bottle with heater jacket

High flow shark nozzle

Motec auto control or driver manual system

Adjustable from +35bhp to +400bhp

Clutch

RCMS spec triple plate alloy cover OS Giken clutch and flywheel

RCMS hydraulic light pressure system

Quick release dry brake fluid connection

Brakes

AP 355mm six pot front (track and road use)

AP 304mm four pot front (drag strip use)

AP 290mm four pot rear with floating discs

RCMS hydraulic carbon handbrake

-3 stainless steel goodrich pipe work and fittings

Wheels

Road/Track use 19x8 forged alloy 1 piece rims

Drag strip use 15x8 spun alloy 3 piece rims

If you have any queries about parts or anything else regarding the car, ring Olly or Simon on 01455 828610 or look on the website www.rogerclarkmotorsport.co.uk

Link to comment
Share on other sites

 BC5RA said:

Wonder how it would do at Tsukuba

Didn't the ZEN car head over there last year???

I'd guess they would be somewhat similar. IIRC the cars that went over didn't do too well due to lack of circuit time/knowledge.

The UK time attack series has some of the coolest cars i've ever seen in it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...