photos of bosch HEC716 conversion?

[sickmatesick]

Seen a lot of posts lately about doing the bosch coil conversion on early legacy/wrx... does anybody have a pic of this setup?

Thanks

[gotasuby]

ill try and get a photo of mine tonight but mine is not pretty

[driftrex]

had them on my legacy but sold that last week. they were bolted to the chassis rails by each sparkplug with a short lead on each.

[sickmatesick]

that would be wicked if i could get a pic gotasuby. will i need to hack my loom up to install them?

[gotasuby]

it got dark before i could do it but will try tomorow.

no i chopped off the plugs off the old coils and connected them to the coils

[EJ20T]

i cant give u a photo as i no longer have my bf5, but its easy, i just lopped off the plugs and some of the wire off my old coils and then soldered them to the terminals and wire supplyed with the coils, then using the brackets supplyed to mount them on the 4 handy holes in the chassis rail. id personal get hec715's and when u get leads make sure u get ones that have a moveable boot on the plug side as it makes them much easier to fit in the heads

[gotasuby]