Johnnynz

Yup shot past it a few times. Looked like it handled ok though.

I was kicking around Rexnet and Rexnet Aus ten years ago, been here about 7 I think, might be longer. Have to have a decent 20 year shindig I reckon.

STM were playing with a BRZ for a while, last I saw it was getting some sort of forced induction but then I havent heard much since.

If you plan to decap talk to Tony at Dtech, he sold me a set decapped and pintle topped flowing 800ish cc. Failing that Five 0 Motorsport in the U.S. make some pretty affordable direct fit injectors anywhere from stock size right up to absolutely massive. But exchange rate may have hurt there affordability recently.

I will make the trek down again,was good fun. Might try and trailer down next time however.

In action at Flatnats...

I have a set of decapped yellows that ran 300ishkw apparently on Tonys old setup. Flow 850cc ballpark.

I can go grab it Saturday afternoon if that's timely enough Pedro. I have a 10.30AM at mount Eden that will probably go for an hour then I can go for a drive so probably lunchtime/early arvo. PM me if thats gonna work

Longer video, almost a full session. [video=youtube_share;FF0TfVy70pQ]

Quick video... Will put some more up I hope. [video=youtube_share;k1zU1vY_njY] Cant make the video show but its in the link.: take

I have a set of v5 Yellows formerly owned by Tony that are decapped and retopped. 800cc+ and he made over 300kw with them apparently. Not for sale but they can certainly do it.

Welcome to the dark side...

Killing my sale!!!! Nah, I wont be shedding any tears if it doesn't go tbh, could use the coin atm thats all.

2015 Rav 4 - Company Car 04 Mazda Axela SP23 - Mrs Car 1998 WRX - Track/Weekend car. In the market for a Ute or cruiser, not sure which atm.

Excellent! Between you, Mad Mike, I and the few others in Auckland who might hit a track we can probably just about think about a Auckland trackday not to long after Flat Nats

Hub dyno read higher or lower?

Mine was second hand, no denying I got a deal. But second hand plug ins seem to pop up around 1k fairly often.

Was such a sick car! +1 Link, local and easy if a little expensive. Second hand ECUs can be had for a good price then find a good tuner for the right price and your on. I found my ECU for $800 and tune was circa $700 off the top of my head. Few years ago now as well.

Not a clue. But were you here for the whole Singapore Spec debacle? I cant even remember if that was a real thing or someone dribbling.

Bit of good cruise music and NZ for extra marks... - Six60 - Dont forget your Roots Only to be Forever White Lines In fact there entire first album (I think it was there first, the gold one) on a Sunny day with the windows down cruising is just epic! - The Black Seeds - So true.

Does anyone want to feature there car on the Facebook page? A couple of nice photos and a mods list, just basic. No need for Number plate or location of the car to be shown.

My Mum had a similar issue a few years ago. As the door opener she was found to be at fault according to Insurance company but the driver happened to be falling over drunk also so she got paid out in the end.

Good to hear it wasnt a major Pedro, you gonna get the tune touched up to suit the change or just wing it? Yup simple clip on clip off like you see on the newer FPV and Holdens. Literally as simple as open bonnet and pull and there off. I dont drive it art night much (or at all for that matter) so I have allowed myself this small bit of nonsense lol. If your on Facebook I can put you onto a guy who supplys them.

Can I fit a newer steering wheel to a v5? I am lazy and CBF doing Air bag delete so I was wondering if I can put a nicer, later model STI wheel on with minimum hassle.