reaperblitz

Keep it. Too bad you can't use it and see what it does maybe serial numbers on the chips and pots may help you figure out what it does I.e impede resistance so the ecu has to adjust its load for fuel correction or some crap. Could also just be a data logger attachment to the board . Yeah the one here has been altered some way, no boost cut, speed limit, and well other things I haven't quite figured out yet either.

From magazines Iv read, only the sti wrxs do. But as said above, sure you can fit it in

Some lazy hot glue gun action there. Doesn't look like the one here. Mind you this one ain't normal either.

Try gt refinishers. Not on the shore but do a pro job

I like!! You guys could make an arrangement with one of the local aux tuners and come up once a month or something and do some of d bois? It's a suggestion. Price wise it may be an intro offer until they get the hang of it they don't need to spend as much time on tunes

Run yellows on a grey ecu with no problems. Slight flame pop but better than lean

I thought the 05 had 5x114.3 rather than the 5x100 the older versions had. I would take the 02 but the 05 is tidy clean and stock. I wouldn't leave the 02 till 100,000ks for a service. Get it checked over and 85,000ks is when first belts and general overhaul gets done so depending on the owners manual, you may b spending an extra grand on this but it should be done on whichever car you get. Anywho any bits off your sf5 they aren't gonna miss you may wanna sell?

Lol or it ends up as a bit of black dust and discolouration in your oil filler cap. Trying to find ways to escape a closed system. Prison break styles

There has to be an easier and cheaper solution to this...

Massive hood scoop with a phat eaton supercharger whining. Beeeaaast

Lol had a custom skunk 2 megapower exhaust. That was a loud effin suby rumble even with a silencer. Kinda was a moving earthquake. Anything over standard with a 3" outlet or more will gain a significant rumble. Don't get those patu carbon fibre 2.5 inch fart cannons

5k would get you some of the bling parts. Just no labour to put them into the engine :'( Just dont be like my friend that wound up the boost on the stock turbos after his mega expensive build just to send bits off it into his pride and joy

Random^ I'm not really a fan of 5w 30. Seen that stuff shear and it ain't pretty to think that it's supposed to be somewhat the blood of an engine. Heard many engines tick over quite noisily too. Good for small tolerances (I.e new vehicles) I just don't get why we are moving away from "the old days" which viscous oil wasn't such a bad thing. 10w30, 40, 50 Lol what's wrong with 20w 50

Yeah. I got invited and I'd go but it's a 9hr drive. Really would like to get the info from it tho.

You tube some sound clips. I was kinda worried about my noises from the engine bay but it was a combination of oil and my v3 heads that make it tick when cold. Dunno if it's true or a story I'm being sold by two workshops but *sigh* it's not burning oil or coolant tho.

Herp derp moment. Was tidying up engine bay and cut wrong vacuum line for one of the pressure sensors. Doesn't get vacuum or pressure lol. I traced it to one of the solenoid/ sensors on the strut tower. The line I mistakenly cut has yellow plastic parts along it...

Be a rangi and oil it lols

I'd drive that. What worries me is that even though none of my cars whether it be previous or current were fugly or outrageous or disastrously stupidly riced, I wonder if Iv ever been picked out as someone that's committed a serious car crime

If you have faith and wanna test your system chuck it on, keep an eye on it, if anything was to go wrong Itl happen within a week of driving or a few minutes of spirited driving lol. If you didn't have any problems before generally speaking you "should" be ok. Just do a quick read up of google with moving to a higher pressure cap etc

I had an old radiator system that ended up splitting hoses from a higher pressure cap

Is it just me or is Oamaru Starlet Gt capital. Also- the turbo waste gate line, is that positive pressure line or vacuum as well? Ta

Sell or send me the gauge holder and il either try fix it or create moulds from it lol

Cable tie all your vacuum lines. Make sure they are all attached

Can you adjust/ tighten the turbo smart one?

You can check codes without running/ starting car