Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Help please!, Car wont start!


Volcanix

Recommended Posts

so im wondering what is making my car wont start, it cranks over fine, has the usual slight whine(very slight) of the injectors priming but its just not firing, it just continously keeps cranking with No sign on life?!

Never had this issue b4 and it was working totally fine untill i parked it in my garage b4 the snow on monday now it wont start!

ive tried a jump start with a push but that didnt work

any ideas? i need help!

Link to comment
Share on other sites

 Volcanix']

[quote name='Dvnt said:

mine has done this as well had no cel codes up, i changed the crank sensor and hey presto its going again ;D

/quote]

is that hard to do?, never done it and its super frustrating having no car :(

its under the alternator. one belt off, alternator out and there it is.

crankpositionsensor2.jpg

Link to comment
Share on other sites

 Volcanix']

[quote name='Dvnt said:

mine has done this as well had no cel codes up, i changed the crank sensor and hey presto its going again ;D

/quote]

is that hard to do?, never done it and its super frustrating having no car :(

nope just a 10mm bolt and its out and dont even need to take belts or anything off

crank-anglesensor.jpg

Link to comment
Share on other sites

 Divine said:

I had this once, and also have a BD5, and I kept stamping the accelerator when it was turning over then it went.

yea i spent a good 10-15 min cranking (in periods, not continously) with foot down sadly to no avail, my gut instinct tells me sparkplugs but i think thats a pig of a job

Link to comment
Share on other sites

 Volcanix']

[quote name='Divine said:

I had this once, and also have a BD5, and I kept stamping the accelerator when it was turning over then it went.

/quote]

yea i spent a good 10-15 min cranking (in periods, not continously) with foot down sadly to no avail, my gut instinct tells me sparkplugs but i think thats a pig of a job

Spark plugs aren't too bad to do. To do my WRX i just removed the pod filter to get to the right hand side and the battery and washer bottle to get to the left.

Link to comment
Share on other sites

welll thanks for the ideas, ill head out tomorrow and attempt to do the crank sensor, and if its not that then i might pay someone to fix my sparkplugs, lol

and if theres any other ideas Please feel free to tell me cuz this has me stumped.

Link to comment
Share on other sites

 Volcanix said:

welll thanks for the ideas, ill head out tomorrow and attempt to do the crank sensor, and if its not that then i might pay someone to fix my sparkplugs, lol

and if theres any other ideas Please feel free to tell me cuz this has me stumped.

Buy your spark plugs from 41, you'll save a fuck load of money! I found out too late unfortunitly

Link to comment
Share on other sites

 Pelvin']

[quote name='Volcanix said:

welll thanks for the ideas, ill head out tomorrow and attempt to do the crank sensor, and if its not that then i might pay someone to fix my sparkplugs, lol

and if theres any other ideas Please feel free to tell me cuz this has me stumped.

/quote]

Buy your spark plugs from 41, you'll save a f*** load of money! I found out too late unfortunitly

Where is 41?, is it in chch?

Link to comment
Share on other sites

 Volcanix']

[quote name='Volcanix said:

welll thanks for the ideas, ill head out tomorrow and attempt to do the crank sensor, and if its not that then i might pay someone to fix my sparkplugs, lol

and if theres any other ideas Please feel free to tell me cuz this has me stumped.

/quote]

Buy your spark plugs from 41, you'll save a f*** load of money! I found out too late unfortunitly

Where is 41?, is it in chch?

http://www.clubsub.org.nz/forum/index.php?action=profile;u=407 pm Mac he'll see ya right

Link to comment
Share on other sites

codes?

after cranking (and car not starting) do you still hear the slight whine (fuel pump ) for 1-2 sec's ?

If yes then crank sensor ok

if no then crank sensor NW

Also are the cooling fans running continuously with ign on... if so the coolant temp sensor failed

note only cam/crank and coolant temp sensors are used by ecu to initially to start engine

Link to comment
Share on other sites

 Ichi Ban said:

codes?

after cranking (and car not starting) do you still hear the slight whine (fuel pump ) for 1-2 sec's ?

If yes then crank sensor ok

if no then crank sensor NW

Also are the cooling fans running continuously with ign on... if so the coolant temp sensor failed

note only cam/crank and coolant temp sensors are used by ecu to initially to start engine

Hey thanks for that! :D

No codes unfortunately as i dont have a code reader/it never put a cel up, went just before to test what you had suggested and blow me down the flipping thing starts! but like it starts with its usual 2-3 cranks and fires but makes a weird creaky/cracking noise and the engine heasitates for 1-2sec then goes into normal idle, revves fine etc, but that weird noise on start up is worrysome.

As for the cooling fans they arnt on, with ign on,

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...