Adjustable Cam Gears for EJ20????

[Reckliz RS STi]

Hey Guys,

Im looking at importing Adjustable Cam Gears for EJ20/EJ25.

These would be sold as a set(4 cam gears)

Just putting this out there to see if anyone would be interested? There doesnt seem to be any on trademe at the moment? So im not sure what the RRP is for them? I may have them in the next 2-3weeks etc...

Would anyone be interested???

Cheers

[funkytown]

can you provide any more information please, cost, brand, pictures to suit which heads etc?

[Joker]

B42000 was gunna get some made

[funkytown]

 JoKer said:

B42000 was gunna get some made

already has them now afaik. new centers put into the RS metal cam gears.

[Reckliz RS STi]

Im just on my fone at da moment, but i will upload pics and info tonite when i get home? Cheers

[czar loc]

im keen..

[B4 2000]

if you have a phase1 engine you'd be better doing what i did, steel gears with new centers made, cost me bout $500 to make.

As pretty much you won't get off the shelf for phase 1 engines unless you're prepared to pay $1300+

Phase 2 engines however are a different story, you could get the BC (Brian Crower) for bout $700? but you'll also have to mod the cam and crank position sensors iirc.

here's a pic of mines

[Reckliz RS STi]

BC adjustable cam gears deliver the easiest way to dial in more horsepower and/or torque without getting underneath the valve cover, disassembling the engine or dealing with onboard electronics. BC gears are CNC machined from aerospace grade, 6061-T6 billet aluminum for ultimate tensile strength. Easy to read, laser etched face features micrometer style markings for precise adjustment (up to 10 degrees in each direction) and quick tunability. Each hub is held down by six ARP made, Grade-8 hex bolts for maximum clamping ability. Hard anodized finish prevents premature surface wear

[B4 2000]

like i said, if you have phase2 engine then ya go for BC, i would. BUT BC don't work with Phase 1 engines

i spent months looking for adj gears, even called BC in the states to no avail for phase 1.

the ones i got made will do me just fine, 10 degrees each way CNC machined blah blah, hex bolts, etc...

Again, Phase 2, Go for BC

Phase 1, you'll need $1300+ for a good branded ones, unless you have a way to make Phase 2 gears to work for a Phase 1 heads

[funkytown]

who did urs abdul?

[B4 2000]

ended up getting them made thru Kiwi cams here in palmy. JL is too busy and more expensive but his ones are more pretty.

[Koom]

 B4 2000 said:

like i said, if you have phase2 engine then ya go for BC, i would. BUT BC don't work with Phase 1 engines

i spent months looking for adj gears, even called BC in the states to no avail for phase 1.

the ones i got made will do me just fine, 10 degrees each way CNC machined blah blah, hex bolts, etc...

Again, Phase 2, Go for BC

Phase 1, you'll need $1300+ for a good branded ones, unless you have a way to make Phase 2 gears to work for a Phase 1 heads

If you need further than 10 degrees, I think moving one tooth is approx. 7 degrees so can infinitely adjust in reality.

Most cap screws in NZ are 12.9 grade which is equivalent to imperial grade-8 bolts aswell.

The ones I have look similar to yours B4 2000. I think that most decent machine shops could figure out how to build these. Using the steel cam gears, this can be done with a universal centre (i.e. doesn't need to be different between the left and right heads) and made to centre on the camshaft the same way as they do from factory.

[Guest]

Hi

I have the BC on mine sort of a version 6 engine and you do have to go from the 6 tooth crank trigger to a later model 25 tooth trigger and you have to be running an aftermarket ecu to tell the car that you effectivley have a version 7+ set up. Link g3 and obviously g4 have this function don't know about other models. The photo shows the 6 tooth crank trigger but has been changed to 25 tooth now.

Exact cost is $749NZ delivered if you do get them I reccomend link below, got them in 3 days and they are in stock. BC don't have any instock until end of the month at the earliest.

http://realstreetperformance.com/store/

[Reckliz RS STi]

yeah they are for the phase-2, ive order the 1st set my RS, im running a G3 Link so hopfully that helps? hahaha

I got them for $488nzd includes shipping?? Is that a good price?

[pingu]

What is the difference between phase 1 and phase 2 engines, I have a closed deck block and v4 sti heads with modified camshafts. But need cam gears to suit now, are the cam gears your buying going to suit my motor? Thanks Des.

[funkytown]

v4 heads by all accounts are Phase 1, so you need the earlier ones. not the BC ones mentioned above by ballrburning