Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

HOW TO TAKE OFF PLASTIC SURROUND?? INSTALLING NEW CLIMATE CONTROLLER IN BH5!


subypower

Recommended Posts

Getting really sick of having a buggered climate controller so bought a new one and got the old one removed when my stereo was installed.

Problems:

1. I now have an ugly gaping hole where my climate controller used to be.

2. I dont know how to take the plastic surround off to re-install the climate controller. Have heard it can be hard and I am prone to breaking things!!

Help will be appreciated :D

See Pics:

Not my car but close enough. The plastic piece that contains the cup holder next to the climate controller is the piece im stuck on.

7062_large.jpg

Link to comment
Share on other sites

http://www.clubsub.org.nz/forum/index.php/topic,763.0.html

However, if it hasn't ever been taken off before, then there might be screws holding in the metal tray that the ashtray slides into. There will be 2 that point up on an angle at the front (get a stubby philips), and one at the rear (get a long philips)

Get all them and you should be right.

Link to comment
Share on other sites

Easy.

1. take off gear knob.

2. take gear knob plastic surround thing. You see it has a join either side of the centre console just where the ash tray is. it has friction clips.

3. take ash tray out.

4. unscrew two screws holding the key tray in (the black thing below the ash tray)

5. unscrew two small screws at top of ashtray, they are the underside of the pocket spacer gap thing you have below your head unit. youll need a stubby phillips and a good finger to feel for them.

6. get a flat head screw driver - pull the centre surround out carefully. it has friction clips in four places. The cup holder on the top left will come out with it as one piece. use the flat head if your struggling but be very careful.

7. youll see the screws for the conditioning unit. undo, pull it out carefully. therell be a white fluted hose in behind it, it may have a spring clip on it.

8. have a beer.

9. smile.

10. rub crutch and burp.

Link to comment
Share on other sites

 Scoobydoo said:

http://www.clubsub.org.nz/forum/index.php/topic,763.0.html

However, if it hasn't ever been taken off before, then there might be screws holding in the metal tray that the ashtray slides into. There will be 2 that point up on an angle at the front (get a stubby philips), and one at the rear (get a long philips)

Get all them and you should be right.

The one at rear doesnt need to be removed just leave that one in so the tray stays in place u can jus push down very slightly and surround will go over it :)

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...