Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

2002 wrx loud whistle help


Recommended Posts

Ok done anothe leak test today also checked for exhaust leaks found nothing what is weird though is I done a oil change because the previous ower used castrol magnatec 10w40 so ive put In castrol edge 5w30 and noticed the noise only happens at 13psi now rather than 9-10psi uhmm now I suspect the turbo bearings may be at fault here think going to bite the bullet and get a new turbo and upgrade the y pipe. Anyone have any suggestions for where to find a aftermarket y pipe to fit a 02 wrx??

Link to comment
Share on other sites

 kwi_fozze said:

while you are there, you may as well swap out the TMIC with an sti jobbie, and use the sti Y pipe, improvement over the stock item and 9 times out of 10 will cost less than just an aftermarket y pipe

Isnt the sti one considerably bigger so the shroud doesnt fit up proper which isnt a good thing. Jump on ebay and get a silicon y pipe or yip sti y pipe gives gains if the late non sti pipe is anything like the early y pipes.

Link to comment
Share on other sites

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...