Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Computer connection device


titian

Recommended Posts

Is a rip off is what it is, Its just a VAG-COM cable and a CD with Free SSM loaded on it.

The Vag-com cable can be bought on ebay for less than $10 and Free SSM is just that Free. Just google Free SSM and a download link will be there somewhere. The software itself is actually quite good i use it regularly.

Link to comment
Share on other sites

 tebbyj said:

Is a rip off is what it is, Its just a VAG-COM cable and a CD with Free SSM loaded on it.

The Vag-com cable can be bought on ebay for less than $10 and Free SSM is just that Free. Just google Free SSM and a download link will be there somewhere. The software itself is actually quite good i use it regularly.

Thanks for the info, TM is full of stuff like that - same things on ebay are way cheaper and with free shipping.

Would any of those ebay cables work fine, even a $8 delivered one?

Link to comment
Share on other sites

 kwi_fozze said:

shall try to find which one it was, got it saved in my library somewheres.

in answer to the reflashable, v7 and revision d onwards, circa 2001 ish.

BH5D here, already knew it was reflashable, not too sure if I have enough guts to do one though - a bit more serious than flashing a phone with a custom ROM :D

Link to comment
Share on other sites

best way to get up the bravery to do it is to read and log, copy the image off etc, have a play with them, and a lot of reading. ecu reflashing isn\'t too bad tbh.

ok so reflashing v7 era, re reading my library of s**t, any old vag com will work to log.

if you want to reflash, you may have to do this to correct a voltage issure that can sometimes pop up

http://forums.nasioc.com/forums/showpost.php?p=39672527&postcount=245

basically a jumper between pin 11 and 16

also depends on the chip inside the cable, there are a few knock off chips cruising around that can cause a real headache, but can be forced to work with some jumpers and a steady soldering iron

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...