Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Head Gasket In A Bottle...?


Recommended Posts

Its rubbish. Sold it for years various brands depending on the customer preference. Rislone seem to be best or liquid copper. End of the day its just clogging up the system and hopefully the leak if its small enough. I have zero faith but if its a pos you just need to run till it dies it may help. Mate had a non turb bc which blew a head gasket then poured a bottle in every few months. Lasted a year or so then sold as is.

Link to comment
Share on other sites

i have personally used this product on a legacy a primera and a 1 ton work digger and all are still going to this day . the primera was a deal . it was the one with red badges and factory blue with blue interior and a lsd front end . flat mate bought it for $800 blown head gasket . trteated it with this . drive it for 3 years . on sold it for 2 k .

annd its only $13

you have to get all coolant out of the system first tho . eg jam the garden hose on into the lower rad hose and make it a snug fit with a rag or summit run the engine for ten minutes

and once i put the stuff in in i make a coke bottle with the bottom cut outa fit tight in the rad cap so the water can expand . let the engine run for half an hour or utill it stops bubbling .

http://www.supercheapauto.co.nz/online-store/products/DynaGrip-Metallic-Seal-Tite-Radiator-Stop-Leak-250mL.aspx?pid=0468#Recommendations

i also see they have this but it appears too good to be true as you dont have to drain or even fluch it after . it is $57 . but if it works you have saved a thousand

http://www.supercheapauto.co.nz/online-store/products/Fiberlock-Head-Gasket-Repair-946mL.aspx?pid=377800#Recommendations

Link to comment
Share on other sites

Oh right, yeah nah saw a WOF + Reg Camry wagon for sale on side of the road today. $500, 3.0 v6. But blown head gasket, was wondering what my chances were of making it drivable with this miracle liquid until my Legacy is going again... But probably not worth it.

Especially at $80 odd a bottle

Link to comment
Share on other sites

Tried Rislone Head Gasket Fix as a "last ditch" option on older cars a couple of times, actually worked pretty well and the cars it was used on are still puttering around. Doesn't require any flushing or coolant replacement, but you will have glittery coolant for quite some time.

Pretty expensive at retail pricing though.

Link to comment
Share on other sites

 megamac said:
Oh right, yeah nah saw a WOF + Reg Camry wagon for sale on side of the road today. $500, 3.0 v6. But blown head gasket, was wondering what my chances were of making it drivable with this miracle liquid until my Legacy is going again... But probably not worth it.

Especially at $80 odd a bottle

done one of them before prick of a job. they have a habbit of blowing on the bank closet to the firewall.(the head furthest away from the water pump if i remember correctly. i wouldn't bother they are slow and heavy on gas might as well go buy a ford falcon

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...