Jump to content
Please check your junk folder for registration emails ×


General Member
  • Posts

  • Joined

  • Last visited

Everything posted by El_Chado

  1. Going to install a Autogauge oil temp gauge. Where is the best gallery plug to use? Also where can I get a M18X1.5 to 1/8" NPT in nz?
  2. Blocked a/c pipe even though it's on drivers side?
  3. Where do I start looking for the cause of water in the drivers footwell? Only noticed it tonight so don't have time to pull the carpet up, but she's pretty soggy.
  4. What was the fix? Cardboard wheel spacers?
  5. Any idea if you need some sort of camber correction kit with lifted springs?
  6. Plus for any kind of suspension lift I think you'd technically need a cert? Not for the lift springs but for the strut spacer blocks.
  7. As shite as getting that redline to fit was, for the price I'd do it again.
  8. Hey bud, Welcome to the forums. Can't help with the cruise control sorry. What makes you want to add it?
  9. Completly agree with fozze. Best bang for buck but be ready with a propane torch and a hammer.
  10. That could work. Also the problem with the redline muffler is i had to remove my towbar
  11. Drags not really my thing, but I'm sure with the right dress and makeup, you'll be fine. photo upload without registration
  12. Sounds like dawg shite without the silencer and sounds stock with the silencer in. I'm going to replace the muffler with a Genome muffler when i can track one down. If you have a forester then the steering linkage needs to be from a forester sti. Other sti linkages are slightly shorter. Im guessing since the fozzy has a factory body lift but I could be mistaken.
  13. I just got this kit a few months ago. Didn't include the up pipe. Had to buy that separate. Fitment was shite but for the price id do it again.
  14. Low kms for the age. Have you checked it on carjam?
  15. online photo upload site V8 and NOS badges....
  16. Hey @RAYDEO, I entered and paid for the amazing race a few week ago. Can you please confirm it's been received?
  17. Got my muffler silencer jammed in and couldn't remove it. Made up this Ghetto set up to "gently tap" it out.
  18. I'm not chasing big Kw's so im not bothered.
  19. Even at the most narrow point where I've had to bash, it's still far wider than my stock pipe.
  20. This was the final result. It's ugly, but it does the job. ( Like my high school girlfriend ) Lucky it can't be seen from the top with the heat shield and intercooler in the way.
  21. I can't seem to find any information on this anywhere on the internet, other than this forum.
  • Create New...