SODA BLASTING

[Guest]

Note to all, Have made a contact with soda blasting company

Awesome for removing paint , oil deposits etc

Wont harm glass or rubber

Makes alloy look like new, good for engine rebuilds or full body strips

The guy is in Upper Hutt, PM me if your keen and I will PM back his ph #

Has said he will give discount to Members

[Guest]

sand blasting vs soda blasting.

Whats the difference?

[Guest]

Sand is grit blasting and NO good for engine, one speck of grit left in an engine and its over

Soda becomes a soft powder after blasting and washes away hence will not harm engine

Soda will not harm rubber or glass either

[funkytown]

 Ichi Ban said:

Sand is grit blasting and NO good for engine, one speck of grit left in an engine and its over

Soda becomes a soft powder after blasting and washes away hence will not harm engine

Soda will not harm rubber or glass either

is this in my budget?

[Guest]

Not priced but he owes me a favour or two, let me see what I can do

Might be FREEBIE time for Funky

[funkytown]

 Ichi Ban said:

Not priced but he owes me a favour or two, let me see what I can do

Might be FREEBIE time for Funky

every man is plyable with whiskey and or beer

[Guest]

In which case that ISN'T a freebie

I'm talk zip /zero /nudder/ freebie

[funkytown]

 Ichi Ban said:

In which case that ISN'T a freebie

I'm talk zip /zero /nudder/ freebie

whos my boi!

[Guest]

Is that you DADDY

NO NO This is all wrong !!

Who's your Daddy?

[subieboy]

I think I is missing something here and it is making it sound all WRONG...

Sweet on the soda blasting tho

[Old Skool Subbie]

 Rossmnz said:

sand blasting vs soda blasting.

Whats the difference?

Sand is only good for removing rust of thicker steel and bodys... aka cars 1970s and before.

Note mondern steel car bodys cant be sandblased cause steel is to thin and the sand causes build up of heat and wrap body pannels like buggary.

sand is of cause uses glass or quarts sand.

sand can eat away at softer metals too

Soda is pretty much baking soda being blasted at hi pressure.

Cant be reused and they go thru alot of it.

I know it can be very dare

How much did they say they could do a body for?

[Guest boostcut]

i had an rx2 fully soda blasted in and out and it was 700 plus shipping not cheap but strips bog out like nothing else

[funkytown]

Right a sample of the fine soda blasting work..

They did a wicked job on my short block, which is currently ungoing its rebuild....

Can be done here in Wellington for $50 a pop plus shipping

[BC5RA]

Thats a nice open deck block :

[funkytown]

 BC5RA said:

Thats a nice open deck block :

yes very observant, what version?

[BC5RA]

V7 or 8

[loud_As]

VER 5 ;D

[funkytown]

 loud_As said:

VER 5 ;D

lol disqualfied for knowing where it came from..

[loud_As]

I know more than you think young grasshopper ,oh and would you still be having my spring compressors?

[Guest SPANKU]

so how many favar do you have left?

i need my manifold done

[spark_38]

lol i need 'two' done.... sitting in my garage

[funkytown]

 SPANKU said:

so how many favar do you have left?

i need my manifold done

 

Insert Quote

lol i need 'two' done.... sitting in my garage

$50 for a block, i would suggest must less for a manifold.... Ask rick

[funkytown]

 loud_As said:

I know more than you think young grasshopper ,oh and would you still be having my spring compressors?

oh rly.. what else do you think you know, and yup i sure do, come round and grab em at any stage

[PhatRS]

 funkytown']

[quote name='SPANKU said:

so how many favar do you have left?

i need my manifold done

/quote]

 

Insert Quote

lol i need 'two' done.... sitting in my garage

$50 for a block, i would suggest must less for a manifold.... Ask rick

$50 for a block is good, might have to get my new one done too, saves a lot of elbow grease and degreaser.