I need a helping hand!!! Getting my gtb going

[eeney]

;D hey howsit!! i just joind up to CS !! and was just wonder if there was anybody out there who coujld give me a hand to get my gtb going!! i stay in Welly , ive just done the single turbo conversion runng a v3 sti ra ecu and a v3 intake manifold and td04 i got it fired up on the weeknd but the revs jumped up to 3000rpm then droped bak down then went bak up to 3000rpm a coulple more times then cuts out! it sorta sounds as if it is missing or something to do with fuel!!

any advise wood be great!! cheers

EEney! ;D

[Guest SPANKU]

did u do anything to the wiring? or changed a complete loom?

[eeney]

yeah i soldier a bout 6wires lik the blog sez have you read it ? heres the likn check it out!!

http://www.clubsub.org.nz/forum/index.php/topic,74.msg162.html#msg162

[Guest SPANKU]

might have to get intouch with scoobydoo hes done it before that i know of that is in wellington

[spark_38]

someone said something about using either a normal wrx ecu or a possumlink for better results as the motors may have different compression ratios...

[eeney]

scoobydoo wea r u??? by the sounds of things i need ur help and ur tha main man!!!

[gazzy2000]

 spark_38 said:

someone said something about using either a normal wrx ecu or a possumlink for better results as the motors may have different compression ratios...

its the BH models that you have to watch out for Comp Ratios, dunno what car this one is. BGs are fine

[Drunkenmonkey]

my bg is running fine with the stock block and 6S ecu, as for the idle im unsure have you checked for codes?

[mostrandomguyaround]

Just wondering. Did you use ReubenH's How To for your wiring? We followed it to a T, but still no luck.

The ECU did spit codes. At first it spat 24 and 44. Which are the Idle control, and wastegate control solenoid. (iirc). Then after we tryed to reset the ECU, (and took the cambelt off to check timing), it spat NO CEL. THen we reset the ECU again, and it spat so many codes we didnt care to write them down.

Does this indicate maybe a problem with the ECU? (it was brought from trademe)

[Scoobydoo]

Oh god its been almost 3 years since I did that.. let me see if I still have the documents and I'll get back to you. From memory it was pretty easy, you do need to do a couple of ECU wiring changes, just connecting two lots of wires together for the coil packs.

Might have to refer back to old MSN logs haha

[Drunkenmonkey]

Reuben and I did it at his place which one did you follow as he has done two rite ups about it and the second on my car is more detailed