Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

how to check if secondary turbo is working


Guest

Recommended Posts

hi all,

i've posted here a couple of times before and have had some great help. i'm using a 1999 gt-b engine to power my kit car. all is going well and seems to be working okay. due to the engine layout in the car i have opted to have two separate exhausts (one from each turbo).

now the strange bit. when the engine is running i can feel exhaust gases come out of the pipe from the primary turbo and nothing from the seondary (makes sense due to sequential logic). however, when i rev the engine above 5,000rpm i still cant feel anything out of the secondary exhaust pipe. i have only reved the engine past 5,000 but not sustained it. on top of that i don't get any code 66 errors.

is there a way that i can check if the secondary turbo is activating?

cheers

Link to comment
Share on other sites

when you rev the car there is no load on the motor - this is the case on single turbo cars as well.

Whats happening is becuase there is no load the car is not generating much if any boost, so all you are feeling is turboless exhaust from the primary, the motor hasnt registered the need to open the by pass valve and build boost on the secondary - thus its all working perfectly normally and no codes :)

It will come out that exhaust when your hammering it actually driving it :)

Link to comment
Share on other sites

Yah, crossover is calculated as much on load as it is on RPM, so you'll never ever ever get the secondary working with the car parked in the drive.

Best way to find if secondary is working is to go and fang it, and if she pulls like an STi above 5K, then all is well.

Link to comment
Share on other sites

thanks for all the advice. i thought it might have something to do with load on the engine.

and i do love the gladwrap solution haha

Link to comment
Share on other sites

As requested a few photos. I know they aren't the best photos but that's because I have a few little suprises that I want to save until the car is finished.

P1000905.jpg

P1000906.jpg

P1000908.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...