99 GT LEGACY CODE 13, WONT START

[GSubXR]

My mate has his 99 GT Legacy wagon in my garage at the moment (taking up time I could be working on my Gixxer I might add haha), it wont start, just winds over, and has brought up code 13, which to my knowledge is a cam sensor code. I have checked the cambelt and everything there is good, and have checked for simple things, oil, water etc. But I am now at a loss as to what the problem could be as I am unaware if the motor will cut out because of a faulty cam sensor. any help would be much appreciated guys, has anyone else seen this before??

[Bugle]

Crank angle sensor? Will turn over till the battery is flat...

[GSubXR]

im not well versed on suby codes, but if that was the case would it not bring up a code for a crank sensor? i might just start by replacing the 2 sensors and see what happens...

[94 Leone]

http://www.clubsub.org.nz/forum/index.php?topic=67.0

camshaft position sensor, the description says irregular signal received, so it\'s likely to be a faulty sensor.

Or you could leave battery unplugged over night, plug back in, clear codes and see if it still brings it up. It could also be faulty wiring in this case.

[GSubXR]

Thanks guys, will definetly try swapping those sensors over and see then, will let you know how i get on

[Durty-Sanchez]

+1 Cam sensor. Cranks but doesn\'t start, is prone to cutting out when idling. You can sometimes fiddle the plug (passenger side of cambelt cover) while cranking and it\'ll come back to life enough to get it going again. Had some interesting moments at the melling intersection trying to do this. Just get a 2nd hand one from the wreckers, mine was like $40 or something