swamp

GC/GF Impreza PCV valve options

Recommended Posts

Hey guys I've done some reading up on pcv valves and with my ic/tb off I'm gonna attempt giving it a good clean - but will replace it soon for peace of mind. 

 

For those that don't know they sit at the back of your intake manifold below the throttle body. 

 

There's four options of pcv valves for our cars according to Amayama, mine is discontinued being a 93-94 manufactured car that used quite a bit of specific, now discontinued parts (GF8 WRX SA). I've checked all part numbers and there is one that is 123 nzd and the other one is 11821AA460 from 1997/04 - 1998/07 cars which is 7.54 nzd. 

 

I'm sure if the thread and diameter is the same as earlier gc/GF models it should be alright! But with no pics or expert who can physically check the stock it's not 100% confirmed. So if anyone can confirm it'll bolt right up no modification required that would be greatly appreciated 👍

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.