Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Help. oil leaking form rear of engine


Guest

Recommended Posts

hi I've just completely rebuilt my 1990 rs engine had it in the car for about 100 km and today i look under the car and there is oil dripping off the sub frame area i cleaned it off and ran it for a bit on idle but no leaking oil only when i revved the engine and gave it oil pressure did oil come out of the rear of the engine it has got new main seal so i don't think it could be that, completely stumped at this stage any help would be awesome.

cheers

Link to comment
Share on other sites

The most common reason I find as the cause of an oil leak from the rear of the engine is not the rear main seal, but the large inspection plate held to the block by 6 screws.

2 causes of the leak from the plate are either;

1) Plate not siliconed or poor application of silicon.

2) Plate cracked (only happens with the bakerlite plates).

I won't put an engine in with a bakerlite inspection plate, only an aluminium or the new pressed steel ones.

I broke that rule with an engine I put in a Legacy GT wagon recently and paid the price - engine out and an ally plate fitted and the problem was solved.

So the bottom line is, engine (or gearbox) has to come out to fix the problem.

Link to comment
Share on other sites

  • Admin
 Markmcrs said:

The most common reason I find as the cause of an oil leak from the rear of the engine is not the rear main seal, but the large inspection plate held to the block by 6 screws.

2 causes of the leak from the plate are either;

1) Plate not siliconed or poor application of silicon.

2) Plate cracked (only happens with the bakerlite plates).

I won't put an engine in with a bakerlite inspection plate, only an aluminium or the new pressed steel ones.

I broke that rule with an engine I put in a Legacy GT wagon recently and paid the price - engine out and an ally plate fitted and the problem was solved.

So the bottom line is, engine (or gearbox) has to come out to fix the problem.

ad agree with this... just replaced mine... was a manufacturer fault really...

Link to comment
Share on other sites

just fixed a leak where the oil drain goes into the head, pain in the arse!

if you're under the car you can usually see if there's oil coming out of the bell housing. If that's clean it'll be leaking from the turbo somewhere

Link to comment
Share on other sites

yeah its deff coming out of bell housing some where but only when the engine is hot on start up from cold there isnt any leaks hmmm

Link to comment
Share on other sites

well Ive replace the rear plate gaskets and guess what its still pissing out oil big time any more ideas? cos i'm out of them

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...