Nisssan Side feeds fit wrx?

[Zach]

Was looking for some bigger injectors for my wrx (currently using 440 yellows) the issue im having is they are side feeds and all the after market ones are top feeds then I came across these http://www.trademe.co.nz/motors/car-parts-accessories/performance/fuel-systems/auction-696475469.htm

They are for sr20 and I\'ve heard stories of people using sti injectors on Nissans so would these fit? including o-rings

[Zach]

also are they any good compared to Subaru ones? I heard suby ones atomize way better.

[hijacka]

What version wrx?

[rex-leggy]

check out 50 motorsport thats were I got my high flow injectors.

they were side feed but for v5/6 rails . easy swap with some bh legacy rails

[Guest]

If V5/6 buy a V7 mani, decap the pinks and wullah save big monies.

[caspros]

Or just decap the yellows like heaps of people have ?

[Guest]

 caspros said:

Or just decap the yellows like heaps of people have ?

V7 better mani and cheap to buy. Sell yellows/mani and make monies back.

Decapping yellows isnt quite as easy as the pinks from my exp but still a 20min job for 4 and cleaning/flowtesting $100 makes it worthwhile. Tony @ d-tech is the man to talk to on that.

[Zach]

It\'s a version 2 jdm wrx. I dont wana decap yellows because I dont want fuel leak I\'d rather invest a bit of money and get good unmodified injectors

[hijacka]

 Zach said:

It\'s a version 2 jdm wrx. I dont wana decap yellows because I dont want fuel leak I\'d rather invest a bit of money and get good unmodified injectors

Like Josh said check out five0 injectors..

You have phase 1 so you either need adaptors or run 2 right rails from v5/v6 or be5/bh5 legacy rev a/b/c, split the line and weld on ends (Check to see it they bolt up but im sure v1-2 do just not v3on)

You can buy adaptors to run p2 injectors in p1 and p1.5 rails from 50 aswell

Worked out cheaper to buy them from there ebay auction than there web store/site

[CUDDAS]

Hey Zach yip what hijacka has just said, they won\'t fit your rails you have phase 1, they will fit the phase 2 injector rails which you would have to modify to fit, i use aftermarket phase 2 rails with 2001 sti forester decappable yellows

[Guest]

Oh decaps are shit 50% of the webs say so. Im running decap 840cc pinks. Idle/run fine at low 200wkw/low duty. Couple of members run them on track cars and others have run them to 360wkw. People that dont like them have never used them.

[Zach]

aw thats great thanks for the infos. I found what I\'ll be needing: http://www.fiveomotorsport.com/asian-import-high-performance-fuel-injectors/subaru

scroll down a bit and they have phase 1 to phase 2 adapters aswell.

[hijacka]

 Zach said:

aw thats great thanks for the infos. I found what I\'ll be needing: http://www.fiveomotorsport.com/asian-import-high-performance-fuel-injectors/subaru

scroll down a bit and they have phase 1 to phase 2 adapters aswell.

Yep, they will cost about 200-220nzd for the adaptor. shipping is a killer but they do ship fast!

If your ordering injectors from them makesure you ask for a low cost invoice or mr key will drain you wallet on arrival

[Zach]

yea that hoe owes me money he aint gona be taking it, thanks lol

[slystiguy]

this is pretty handy fyi - http://www.clubsub.org.nz/forum/index.php/topic,8523.0.html

I\'m probably going to follow in this guys footsteps

[raijin]

I don\'t know what your power goals are but I have a set of blue OEM 550cc side feeds on V5/6 rails coming off a car shortly. Drop me a PM if of any interest. 8)