Twin turbo wrx

[Guest boostin]

No, its just a pic I found on the net, and it appealed to me!! ;D

[Guest boostin]

Scroll through the pics until you get to the turbo H6....

http://amauto.com.au/gallerystainless.html

[BC5RA]

Ah yes, One of the guys is on RSlibertyclub.org selling his stainless intakes etc nice work!

[gtlegacy]

there is a write up on the perrin website about there sti with h6 turbo engine (graphs were above) and videos on youtube comes on boost fast as also a lot of info floating around here aus and in us google search comes up with alot of it and yes costs a lot more money to have a bullet proof engine and the ecu to control it

[Optical]

 vaccine']

[quote name='Optical said:

there's a build thread on nasioc of some guy in the south island building an h6 turbo motor. Lost track of where he was at though... huge $ to get it to handle anything approaching decent power. i'd just work an ej257 to be honest, awesome engines.

/quote]Pistons are 600, rods are 800, bearing are 200, sleaves are 800. $4.5K and you have a bullet proof bottom end.

Perrin made 400hp atw with just slugs on the stock H6 motor running 16psi through a GT35R with .82 rear.

They are not that hard to make power from. No different to a 2.5, but with alot more flow.

yeah righto, not sure where you;re getting 6 forged pistons etc for $600 from. Or 6 sleeves bought and installed for $800. Call me cynical but i'll believe it when i see it

If it were that easy everyone would be doing it

[Guest boostin]

Haha, I originally read that as each... ie. $600 per piston, not for 6.

[Guest keltik]

Didnt perrin pay something near 2k USD for getting the block sleeved?

[Guest boostcut]

2k is a bit of a steep price. if ou have an old oven at home you can actually do it yourself, have you heard of rips in rotorua? the gtr heaven place??? well the engine reconditioner who does all of his head and block work (regal automotive) use a ****ty old oven at something like 200 degrees on grill ;D and pull them out. its not a hard job and to put them back in same process but put sleeves in freezer and warm block up etc...

i had a 4age block done for 300 including a hone and deck.

[Guest]

 Optical said:

yeah righto, not sure where you;re getting 6 forged pistons etc for $600 from. Or 6 sleeves bought and installed for $800. Call me cynical but i'll believe it when i see it

If it were that easy everyone would be doing it

ROFL.. prices are US and from supertech and other places.

machining is on top of all that obviously. :

try google.

[nzkaosnz]

id be highly interested to know where to get pistons for $600 from... especially 6 of them, as last i heard, they wernt making kits for the H6 yet...

[Optical]

 vaccine']

[quote name='Optical said:

yeah righto, not sure where you;re getting 6 forged pistons etc for $600 from. Or 6 sleeves bought and installed for $800. Call me cynical but i'll believe it when i see it

If it were that easy everyone would be doing it

/quote]ROFL.. prices are US and from supertech and other places.

machining is on top of all that obviously. :

try google.

I usually do to avoid listening to people talking out their a$$

[Old Skool Subbie]

Sleeves for a EG33 in a sand rail... I think it was $700 US or so just for a sleeve. so x6 of them.

Good beefy ones tho

[Guest boostin]

Sleeves

More sleeves

Pistons

[Guest]

 Optical said:

I usually do to avoid listening to people talking out their a$$

Your ignorance is your loss then Princess. :