Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Angle grinding accident


Recommended Posts

 zarnah said:

yeap, shes doin good though, last surgery in december, and this was today....... happy happy!

SANY0069.jpg

I think shes making it all up to get time of uni.... haha, now wheres some more gore and injuries and scars pictures?

Ha ha I lived in the little town by those falls

Blink and you miss it

Link to comment
Share on other sites

deff... sick yep, when i was in the boning room our first aid lady put her fore arm thru the skinner from wrist to elbow but i dont have a picture of that just the image still in my head, & the fella who slipt & stabbed himself right under the arm & got a vain (we have no sick emotion :-X)

Link to comment
Share on other sites

 CUDDAS said:

^^ that's fully sick ryan :o & where was the niagra falls (not really obviously) pic taken???

also the fella i work with put his finger in the hydraulic pipe bender at work last thursday & it popped & flattened it from the knuckle :-X

hmm those falls were awesome, just stopped at some rest area to take the dogs for a run round and then saw all these people standing on a viewing platform pointing and ooohing and aaaaahing at something so went to see what all the fuss was about and theres a bloody great waterfall there haha was just out of murchison on our way back home from motueka

Link to comment
Share on other sites

 zarnah']

[quote name='CUDDAS said:

^^ that's fully sick ryan :o & where was the niagra falls (not really obviously) pic taken???

also the fella i work with put his finger in the hydraulic pipe bender at work last thursday & it popped & flattened it from the knuckle :-X

/quote]

hmm those falls were awesome, just stopped at some rest area to take the dogs for a run round and then saw all these people standing on a viewing platform pointing and ooohing and aaaaahing at something so went to see what all the fuss was about and theres a bloody great waterfall there haha was just out of murchison on our way back home from motueka

I have seen it in flood and I must say I would hate to be in it when its in flood

Link to comment
Share on other sites

That thinly sliced hand was one that went in a paper shredder.

Angle grinders are nasty because they don't just cut, they grind out a chuck of tissue so it's actually missing. Sometimes you can't just stitch things up if too much is missing. I fix a lot of angle grinder injuries at work.

Link to comment
Share on other sites

There's a PP presention on our work server which is used in inductions and training.

It shows a few of the incidents which has happined on this site. Grinder cuts, falls, and whats left of someone after they have fallen into a tank of Caustic soda.

But shows you how easy it is for somthing to go wrong. Take the right steps before hand and wear the right protective gear (PPE)

Even if it is at home.

Link to comment
Share on other sites

 D-Style said:

But shows you how easy it is for somthing to go wrong. Take the right steps before hand and wear the right protective gear (PPE)

Even if it is at home.

Don't be a fool, ....

Link to comment
Share on other sites

i have a 30 cm scar up my back from where they put two titanium rods in my back, nice neat scar too! and they are that good you cant even see the scars on my face, even tho there were 30 stitches in there!!

we also watched health and safety videos during my apprenticeship, the worst injuries were from loose clothing or hair grabbed by tractor pto shafts - includin the lady who got scalped, and the only reason her own face didnt suffocate her was because someone held her forehead up!!

Link to comment
Share on other sites

 penguin said:

i have a 30 cm scar up my back from where they put two titanium rods in my back, nice neat scar too! and they are that good you cant even see the scars on my face, even tho there were 30 stitches in there!!

we also watched health and safety videos during my apprenticeship, the worst injuries were from loose clothing or hair grabbed by tractor pto shafts - includin the lady who got scalped, and the only reason her own face didnt suffocate her was because someone held her forehead up!!

Ok this DEMANDS an explanation :)

I have wee scars on my right shoulder and wrist :) done some endoscopic repairs :) a lot of work, a lot of damage only little scars :(

Link to comment
Share on other sites

Iv had a few close calls with cuting blades on grinders getting caught and breaking apart.

Though this is caused by cutting on the wrong part of the blade and on the wrong angle.. So if you use an angle grinder correctly you shouldn't have any kick back issues as the blade should ride up the material rather then bite in to it.

I prefer to stick to my gas powered soildering iron and leave the angle grinding to our fabricator.. as atleast if I burn myself it doesn't hurt as it quaterises (I think thats the word and I can't spell to save myself) the skin almost instantly due to the tempature its at.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...