What turbo do you think this is?

[Minaj]

Purchased a new turbo, just been doing some research people been saying its a t3/t4 , Been told its a 3076r

exhaust housing is .63 looks small tho.

what are your guys thoughts??

[Guest]

Love the way you bought a turbo and you have no idea what you bought lol. This the one off spoon? Whats the number on the chra? The exhaust housing will have the a/r on it. Looks bigger than .63 maybe .82 hard to tell from these pics.

[lachlan]

its a superhappyfunslide turbo . they used them in fast and furious

get the numbers off the tag on the core . failing that take covers off and measure both wheels . end of story

[Minaj]

 evowrx said:

Love the way you bought a turbo and you have no idea what you bought lol. This the one off spoon? Whats the number on the chra? The exhaust housing will have the a/r on it. Looks bigger than .63 maybe .82 hard to tell from these pics.

yup, off spoon i think its .63 the downpipe from turbo is 2.5"

[Guest]

He said he had a couple of shops check to confirm so just double check with them if concerned. The housing will say .63 on it if it is.

[Guest]

Cant wait to see the back to back dyno sheet vs the td06sl2.

[Minaj]

 evowrx said:

Cant wait to see the back to back dyno sheet vs the td06sl2.

haha yeah, no more conservative tune more like power tune now

[lachlan]

just buy a random chip off trade me with some tune on it . then itll match your turbo

[Pappu1]

yep thats the one

the guy i got it off said was a gt3076

here\'s hoping it is

(cant really trust trademe these days i wonder at times)

[ra555]

Have a look should have a code on the turbo to find out what it is? Secondly shound be a number inside the ex housing which tells you the a/r but looks like a 63

[Minaj]

Yeah allgood, cars off next monday to get everything done.

[funkytown]

pull the covers off and measure the wheels. simple.

provide me the number on the CHRA as mentioned.

picture from the rear to show me the turbine housing size please.

Could be a gt3071r with large 4" intake cover. (again measure the wheels and you know for certain what you have.

ooooor just keep guessing.

if its a genuine 0.63 AR turbine housing with 60mm turbine it should have 3" outlet, some of the crappy ones have smaller turbine and the smaller outlet.

if it is a small turbine 3076 - its going to blow the fat tamali. the 76mm wheel already maxes the 60mm turbine.

[greatdanz]

 Minaj']

[quote name='evowrx said:

Cant wait to see the back to back dyno sheet vs the td06sl2.

/quote]

haha yeah, no more conservative tune more like power tune now

yeah the TD06 will go well on H8WRX

[Minaj]

[funkytown]

looks 0.63 AR

now to cure everyones curiosity, carerfully remove the bolts that hold the housings on and take the inducer and exducer measurements for us

what turbine looks like

what compressor will look like

[tez n u]

Im failry sure it should say what it is on the tag youll find on the core

[Guest]

 tez n u said:

Im failry sure it should say what it is on the tag youll find on the core

Thats the problem dude no tag.

[ra555]

 tez n u said:

Im failry sure it should say what it is on the tag youll find on the core

yo bro. Haha it myt be a fake

[funkytown]

just measssssure it...

talk about make the problem harder than it needs to be

[Minaj]

Found the tag it was on the other side of the exhaust housing really rusty tho, and yes it does say .63

[lachlan]

No , just no :

[funkytown]

0.63 tells you nothing useful minij

[lachlan]

chra tag or do you want me to circle it ?

[Minaj]

There is no tag lol it only says .63 on exhaust housing

[boon]

No tag on the core = Garrepp GP3172Q ching-chong special.