Sign in to follow this  

Work kiwami fitment

Recommended Posts

Don't think they will. Pretty sure from memory with the Legacy’s they needed to be 8.5 to clear brembo’s at that offset which will be the same for you. Something more like 38 offset may be a different story though.

Share this post

Link to post
Share on other sites

while the width doesn’t really matter too much, 9.5+ Kiwami  are deep concave, below 9.5 is medium concave, 7.5 would be very low concave which would also play a part in clearing the face of the brakes.


i would say the issue is more the offset.


i had 9.5 +38 which cleared brembos with a little bit of extra clearance.


if you need to you can get a small spacer worse case scenario 


Edited by Omsin
  • Like 1

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this