Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

First outting - eastern creek - BUILD PICTURES NOW INCL'D


Odie

Recommended Posts

Well thought I'd give an update on the first race for me at eastern creek here in sydney :)

day started as all days... Scrutineering is just as badly organised here too...

Mind you it was the first time for this car... 98 sti coupe :) pretty STD at this point :) just ecu and exhaust, cage and suspension.

Car went brilliantly, minor over flow from radiator but that stopped on it's own :) new tyres scrubbed in nicely, brakes really need work lol compared to my nz car.

Competed against all sorts incl GTR35's finished up running 2 mins flat and my brother 1.55 not bad considering he has been round e creek about 800 times over last few years :) no. Ranking to boost about just yet but we have a wicked car that will be kicking arse once the fmic turbo are done along with new ecu and dyno :)

that's all for now...

NZ Clubsub Foriegn correspondant over and out... :)

have fun at mega meet everyone :) wish I could make it back.

Link to comment
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

  • 7 months later...

OK, so here goes... an update...

Some of the parts for this build have not been done before, so some custom machining has been in order along the way. Items selected for the build...

Corsa Veloce Intake Manifold & custom fuel rails

Process West Vmount intercooler & Radiator

Process West Surge Tank

Hypertune 3" throttle body

Bosch 2000cc injectors

Weldon Fuel Pump (dash 10 in/out) - NOT shown in surge tank picture

IMG_1449.jpg

IMG_1461.jpg

IMG_1462.jpg

IMG_1471.jpg

IMG_1470.jpg

IMG_1468.jpg

IMG_1467.jpg

IMG_1466.jpg

IMG_1465.jpg

Link to comment
Share on other sites

 al said:

What sort of improvement will the intake manifold provide?

The Plenum is tuned and polished so less disruption to air flow, it is also larger which reduces channeled air flow apparently and the pipes are all tuned and polished at optimal angles... Or so I believe...

The end result is a massive shift in the power curve, the torque comes on sooner and stays the entire way through...

Something I didnt mention is that the FMIC is being custom fitted by Process West and the pipes are being made / bent in the car... so they will be SHORT :)

Link to comment
Share on other sites

 zarnah said:

what I would like to know is how the hell you have 10k+ posts without me ever seeing a single post by you before this thread? :-\

LOL you are obviously a newbie... I was president for a couple of years here :) plus lots of posts in hidden sections :)

*checks your profile* ah yes you joined as I left the country last year... so add another 5 years on and you will get close to my time with the club :)

Link to comment
Share on other sites

 Odie']

[quote name='zarnah said:

what I would like to know is how the hell you have 10k+ posts without me ever seeing a single post by you before this thread? :-\

/quote]

LOL you are obviously a newbie... I was president for a couple of years here :) plus lots of posts in hidden sections :)

*checks your profile* ah yes you joined as I left the country last year... so add another 5 years on and you will get close to my time with the club :)

you mean I RE-JOINED after the forums crashed last year? yes, was on here for a fair while before that haha, since about 2006-7 i thinkn ;D

Link to comment
Share on other sites

 zarnah']

[quote name='zarnah said:

what I would like to know is how the hell you have 10k+ posts without me ever seeing a single post by you before this thread? :-\

/quote]

LOL you are obviously a newbie... I was president for a couple of years here :) plus lots of posts in hidden sections :)

*checks your profile* ah yes you joined as I left the country last year... so add another 5 years on and you will get close to my time with the club :)

you mean I RE-JOINED after the forums crashed last year? yes, was on here for a fair while before that haha, since about 2006-7 i thinkn ;D

You recall that but not me... I hurt especially since me and Funky spent so bloody long getting the damn thing going again.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts



×
×
  • Create New...