Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Recommended Posts

Posted

Is a rock stuck somehwere or has something failed? Driver's side front wheel.

 

 

Wife thinks it started while she was driving around.

 

Jacked it up and tried to wobble the wheel and it seems fine. Anything else I should check? Pull the calliper off?

  • Admin
Posted

Eww...

Worth getting the caliper off to narrow it down to braking or something further in. Can you shake he caliper at all? Had a caliper bolt work it’s way out on an old car which let it flex just enough to always rub on the rotor. Didn’t sound quite that screechy though. 

Posted (edited)

That sounds like a stone or something is caught somewhere between the caliper/rotor and backing plate.

Sadly, to make it easiest, the wheel will have to come off.

And be great full you're only dealing with STEEL calipers. Not alloy Brembos etc. Low chance of stripping threads

Edited by Individualities
  • Like 2
Posted

In the process of moving the car from the street to the drive way it stopped,phew.

 

Funny as my wife says she drove for about 1km with it doing this...maybe reversing with full wheel lock was the trick!

  • Like 1
Posted

Could also be a wheel bearing,

I had this in a 2000 Forester, wheel wasn't wobbly but one side of the bearing was turning on the hub.

Posted

Sounds like something scratching on the backing plate behind the rotor. If you're curious you could pull it apart and you'll probably see the scratches on the plate. 

Posted

Will take it for a spin round the block this avo to check it is definitely gone.

 

Due for a service so will have a poke around when AJ has it on the hoists.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • Joker  »  Rosssub

      RIP Ross
      · 0 replies
    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 1 reply
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    41k
    Total Topics
    574.4k
    Total Posts


×
×
  • Create New...