Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Sgt clutch issue


WRX300

Recommended Posts

Hi guys, was on the forums a long time ago, 2012-2014 ;lost old account details but am back in a Subaru. Just after some advice.

 

Car: 2007 Subaru Impreza SG-T

 

I'm having an issue, its nothing major but couldn't find a thread on here about it.

 

When I press clutch in and also when I release it theres a very annoying squeeky sound. I had a quick look on YouTube and a guy on there sprayed some stuff on the clutch/brake/etc pedal assembly which made noise go away. I'm hoping it isn't a firewall problem, or anything... because the car runs well and I love driving it it's just the squeek that annoys me. If you can send some advice if you have encountered this ptoblem that'd be great?

 

Thanks

 

 

 

Link to comment
Share on other sites

Agree with Andy_Mac. I did this today to my car funnily enough. I only had a squeak when the clutch pedal was released. Being lazy I just carefully sprayed a lubricant on the push-rod going through the firewall. Is your noise from inside the car or outside in the engine bay? Should help isolate the culprit...

  • Like 1
Link to comment
Share on other sites

Noise/squeek is louder inside car. Can also hear it outside but it's all good. Have decided to just leave it as it is for now until something forces me to investigate further but if it's a typical thing these cars are known for then I will let it be for now.

 

I also have another question guys, if someone can advise whats best,

 

A week before lockdown I had sorted a 2.5" exhaust system and a subtech downpipe installed to my SGT. Because of the following situation (lockdown) I couldn't sort a tune for it and funds that were for the tune have now been used to pay bills,expenses etc during lockdown... realistically I won't be able to get it tuned for said dp/exhaust for another couple months, once work picks back up ...

 

Is it ok to use car as is, untill I sort tune? Will be driven with care ie. Under 5k rpm, as don't want to risk anything... or should I park her up untill tune and use my Motorbike instead?

 

Cheers

Link to comment
Share on other sites

  • 4 weeks later...

Thanks all.

 

Can anyone recommend someone in south/east auckland that can do a TGV delete on my S-GT and also disable and delete my secondary air pump. Was looking into doing it myself but haven't turned a spanner in a while and need a courtesy car for work for the moment whilst the cars worked on. Anyone?

Link to comment
Share on other sites

Why TVG delete gains are tiny. 

can leave them forced open and just pull the pump if you want an easier fix. 
 

Sub tech is penrose 

 

possum Bourne sells the little plates to blank them. The under turbo one you can do at solenoid end Leaving the steel pipe to make it way easier.

 

either can delete the codes even before the pump is pulled out. 
it’s the cutting the solenoid to keep the pressure sensor that’s the careful bit. You can leave it whole if needed it just won’t be tidy. 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • Joker  »  Rosssub

      RIP Ross
      · 0 replies
    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 1 reply
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.8k
    Total Posts


×
×
  • Create New...