Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Recommended Posts

Posted

Just pulled the Cabin Filter out of my 05 BPE Legacy wagon and it was rather disgusting and I don't believe has been changed in some time.

Just wanting to know if you guys know where to source a replacement - OEM or something better.

Pics of current one after a brief clean but still filthy.

20160317_145835_resized_zpsibhw64yc.jpg

20160317_145831_resized_zpsfaqorodj.jpg

  • Admin
Posted

Surely it's a generic size you can just pick up at superrepco. I always just wash mine, not quite as good as new but can't be F'd finding replacement ones.

Posted

Try ebay. When i had a bmw i got a set off there for less than $20. Presume they have subaru too. Won't be quite as high quality but likely to be significantly cheaper!

Posted

I could probably get you a Sakura one through work. I just cross referenced Ryco part # RCA152C and it seems like the right one.

Did a quick calculation and it would be around $10+gst. Not sure how good that price is compared to retail?

Will need to wait till I'm in the office to get confirmed pricing etc and to see if i have any stock out in our branches.

If you're keen flick me a PM to remind me and I'll have a look into it for you.

Posted

Yeah that sounds about right if you go genuine.

BH are like $85 trade last time I checked, well over $100 retail haha. The only place that could physically match one was partmaster for $25 I think... Took a bit of hunting out

Posted

Genuine BH/BE was around $70, not even charcoal. Stock BL/BP is not charcoal either and is about the same $$. Got a washable Blitz in mine, pretty happy how it performs and was cheaper than stock to start with.

Posted

Cheers guys, I hit Winger up via email to get a ball park figure for one - $71 + GST

I'll do a little digging to find something cheaper.

  • 3 weeks later...
Posted (edited)

Sorry to thread jack but I couldn’t get one from Repco for my 2008 GRB STI hatch because apparently they didn’t stock them for cars 2008 or newer (wtf right?).

Anyone know where I can get one? Found them on ebay for very cheap but can’t be bother waiting.

Edited by guiltysky
  • General Member
Posted

that question hurt my brian, but it is a 2008 (not newer than?

soz not much help, Subaru Dealership? Strongs / wingers etc'?

  • 4 years later...
Posted

Just ordered some cheap ones from E-bay search 87139-33010 and they are  like USD$8 each with free delivery. One of the pictures has it a compatible fit with the Gen 4 Legacy BPE 3.0R. Up to 2 months delivery but great if your not in a hurry, just ordered 2 for NZD$26 total.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • Joker  »  Rosssub

      RIP Ross
      · 0 replies
    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 1 reply
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    41k
    Total Topics
    574.4k
    Total Posts


×
×
  • Create New...