Dyno run

[Boxer4turbro]

Okay, so i'm hoping 'tha boys' might have options for me or a group of us.

 

I'm wanting to run my Bh5 on a dyno to get an idea of what it's doing. The car doesn't need a tune, just the run.

 

Most shops that have these facilities charge exorbitant fees. 

 

So the question is, does anyone know a place I should go within the community or whether there will be a meet and we can all have a run and pool some funds together etc. 

 

Ideas or info will be much appreciated.

 

Cheers

 

D

[J CHILN]

Where abouts are you located? If in Wellington I can try sort something? 

 

 

[Boxer4turbro]

Bugger. Auckland. Thanks for thought though man.

Sent from my SM-N950F using Tapatalk

[A_J_T]

Id be keen to toss my BE5 on and see how the DIY tune is actually performing haha. If we get enough interest im happy to make some calls and get group prices etc.. generally speaking i think 10 is the lowest number of cars to make it cost effective 

[Dairusire]

I could indeed be interested in this as well. You'd likely want a roll-on-roll-off dyno to save time between car changes, but provided the right kit, you can do it fairly quickly even with a hub dyno.

[A_J_T]

Yea good point @Dairusire, some people get pretty precious about their wheels too so easier if they never have to come off 

[Dairusire]

That reminds me. @PBMS You lot promised us a Dyno Day from last years MegaMeet. Ahem.

[preim]

I would be interested to get a run on another dyno just to see what it says

[Individualities]

Same here. Just for s***s and gigs. Happily make a trip down if I'm not working (seasonal work). 

 

Edit: if I was to make it down, how long/hard would it be to raise the redline on my car to 8000rpm @A_J_T? 

Edited November 6, 2018 by Individualities

[Andy_Mac]

15 minutes ago, Individualities said:

Same here. Just for s***s and gigs. Happily make a trip down if I'm not working (seasonal work). 

 

Edit: if I was to make it down, how long/hard would it be to raise the redline on my car to 8000rpm @A_J_T? 

 

What is it currently at on yours? Same as the GT/RSK’s?

 

I'd come up for another one. Might actually see some cars hitting decent numbers now.

Think the highest was like 230odd wkw last time.

 

Edit: Found the pic of the board, the top result was even worse than I remember. 

Everyone was down at least 20-30kw over what they were expecting.

 

 

[Joker]

get a group & usually 10 or so cars will keep a shop busy & make it worth having a 'dyno day'

 

 

[Individualities]

1 hour ago, Andy_Mac said:

What is it currently at on yours? Same as the GT/RSK’s?

 

Yup. 7500rpm.

Wanting 8000rpm so I don't have to shift to 3rd in a 100km/h sprint lol. S401s got the EJ207 short block, with fully hand balanced internals.

[Andy_Mac]

True. Guess that's one of the few upsides to the 4th gens 6mt’s long gearing, can hit 103 safely in mine without banging off the limiter

[A_J_T]

2 hours ago, Individualities said:

Same here. Just for s***s and gigs. Happily make a trip down if I'm not working (seasonal work). 

 

Edit: if I was to make it down, how long/hard would it be to raise the redline on my car to 8000rpm @A_J_T? 

Entirely dependent on if I have a definition to read your ECU. I dont think I do, if i did its a 10 minute thing

2 hours ago, Andy_Mac said:

Everyone was down at least 20-30kw over what they were expecting.

 

Yea mine was down from 213kw to 193kw that day, a lot of people seemed upset about it but I was stoked that mine made 193 that day.. it was hot and humid and the boost mine hit confirmed it was pulling a little cause it was set to target 20psi and would consistently hit 20 on a cool day. That being said i did have to ask to have them toss a fan in front of it.. so wont be going back to them sadly.

 

@PBMS you're up, not sure if you monitor this anymore though will email y'all

[A_J_T]

I've sent PBMS an email on our behalf. Will wait and see what they can do for us and how many cars is best. 

[Pappu1]

if there are confirmed entries, i can see through and find what my local dyno place would do..

in Manukay btw

[Boxer4turbro]

Cool beans fellas!!

Will wait and see then.

Sent from my SM-N950F using Tapatalk

[A_J_T]

36 minutes ago, Pappu1 said:

if there are confirmed entries, i can see through and find what my local dyno place would do..

in Manukay btw

Always good to have pricing and details from more than one shop, I say go for it! 

[PBMS]

We love to support CS - you are our favourite club after all.

 

Make sure you keep in contact - email is best - [email protected], however feel free to give us a buzz at any time on 09 238 5732.

 

Cheers, Pat

[Dairusire]

We love to support CS - you are our favourite club after all.
 
Make sure you keep in contact - email is best - [email protected], however feel free to give us a buzz at any time on 09 238 5732.
 
Cheers, Pat

Sooooo, does this mean we get our dyno day that we were promised for free last year? Haha

Sent from my TA-1012 using Tapatalk

[A_J_T]

6 hours ago, PBMS said:

We love to support CS - you are our favourite club after all.

 

Make sure you keep in contact - email is best - [email protected], however feel free to give us a buzz at any time on 09 238 5732.

 

Cheers, Pat

Hi Pat, 

 

Good to hear from you and see you on the forum. I did send an email via the form on your website, but I’ll try flicking it through to that address and hopefully we can get something sorted. 

 

Cheers,

Aidin

[sobanoodle]

Lol might be keen to have my diesel tractor dynoed, out of curiosity.

 

..if you don't mind a german there  

[Dre]

12 hours ago, sobanoodle said:

Lol might be keen to have my diesel tractor dynoed, out of curiosity.

 

..if you don't mind a german there  

I’d like to see the torque figures on that diesel tractor.

[A_J_T]

Update: 

 

Been in touch with PBMS.. further details to come. Currently looking at something early next year as most people are super busy with business this time "Including myself". When I have more info on prices etc I'll start a dedicated thread with a poll to opt in and what not. 

 

Cheers

[Dairusire]

No really. There shouldn't be prices bud.

Back at MegaMeet 2017 when PBMS didn't turn up as a sponsor, they said they'd throw us a free dyno day for ClubSub Members as a thank you.

Seriously! I think there's even a post somewhere about it on the forums.

Sent from my TA-1012 using Tapatalk