What have you done to your car today?

[AdamOst]

 boon']

[quote name='ADIKT said:

b]Both rocker cover gaskets leaking

Cracked up pipe [/b]

I could have told you these 2 things without even seeing the car

Find me a 15 year old Subaru with a non-leaking factory rocker cover gasket...

14 year old, 150000kms subaru reporting in.

>_<

[DRFVDR]

my 1986 leone rx2 does not have rocker cover gasket leaks,300000 km not a leak

[Fail57]

Sick of looking at unevenly heighted king springs so chopped half a coil out of the front. Way too rough of a job for me so just ripped them out and chucked some coilovers in there. Should have just got

A set to begin with really. And wrx back seats went in

[darren23]

painted the bumper lips black and door skirts looks way better

[subieboy]

 boon']

[quote name='ADIKT said:

b]Both rocker cover gaskets leaking

Cracked up pipe [/b]

I could have told you these 2 things without even seeing the car

Find me a 15 year old Subaru with a non-leaking factory rocker cover gasket...

My GTB is 16 years old Dec this year, no leaks.

[chulozumo]

 ADIKT']

[quote name='sti555 said:

will be interested to hear if you notice much difference.my guess is a tiny bit of lag but better top end

/quote]Will let you know when I pick her up!

looking forward to it

Have you picked her up yet?!

Oh god I miss that sound!!! :-[ your gonna love it bro hahahah

[ADIKT]

 chulozumo']

[quote name='sti555 said:

will be interested to hear if you notice much difference.my guess is a tiny bit of lag but better top end

/quote]Will let you know when I pick her up!

looking forward to it

Have you picked her up yet?!

Oh god I miss that sound!!! :-[ your gonna love it bro hahahah

Not yet, hopefully some time today

I still have the factory exhaust so probably wont hear to much - hopefully my new downpipe will help with that

[ADIKT]

 ADIKT']

[quote name='sti555 said:

will be interested to hear if you notice much difference.my guess is a tiny bit of lag but better top end

/quote]Will let you know when I pick her up!

looking forward to it

Have you picked her up yet?!

Oh god I miss that sound!!! :-[ your gonna love it bro hahahah

/quote]Not yet, hopefully some time today

I still have the factory exhaust so probably wont hear to much - hopefully my new downpipe will help with that

So I wont be picking car up till Tuesday (they been really busy!)

[Guest]

 ADIKT']

[quote name='sti555 said:

will be interested to hear if you notice much difference.my guess is a tiny bit of lag but better top end

/quote]Will let you know when I pick her up!

looking forward to it

Have you picked her up yet?!

Oh god I miss that sound!!! :-[ your gonna love it bro hahahah

/quote]Not yet, hopefully some time today

I still have the factory exhaust so probably wont hear to much - hopefully my new downpipe will help with that

So I wont be picking car up till Tuesday (they been really busy!)

Borrow their hoist and do it yourself.

[ADIKT]

 evowrx']

[quote name='sti555 said:

will be interested to hear if you notice much difference.my guess is a tiny bit of lag but better top end

/quote]Will let you know when I pick her up!

looking forward to it

Have you picked her up yet?!

Oh god I miss that sound!!! :-[ your gonna love it bro hahahah

/quote]Not yet, hopefully some time today

I still have the factory exhaust so probably wont hear to much - hopefully my new downpipe will help with that

So I wont be picking car up till Tuesday (they been really busy!)

Borrow their hoist and do it yourself.

dont have time. I\'m at work. I close at 5 so do they. I\'m not to bothered. Will just make one of the boys drive to ye drags on Sunday

[Guest]

Finished fitting and plumbing in custom oil catch can what a pain in the arse the hose from the crank breather was to hide and get back in once cut to length.

Also finished connecting my ethanol sensor into the fuel return line, no cutting of hoses needed, due to luckily correctly positioned join in hose, remove it fit sensor all good. Flexi fuel set up all ready to go just needs a tune, easy.

[Guest]

 ballsrburning said:

Finished fitting and plumbing in custom oil catch can what a pain in the arse the hose from the crank breather was to hide and get back in once cut to length.

Also finished connecting my ethanol sensor into the fuel return line, no cutting of hoses needed, due to luckily correctly positioned join in hose, remove it fit sensor all good. Flexi fuel set up all ready to go just needs a tune, easy.

Was that the last piece of the puzzle?

[Guest]

 evowrx']

[quote name='ballsrburning said:

Finished fitting and plumbing in custom oil catch can what a pain in the arse the hose from the crank breather was to hide and get back in once cut to length.

Also finished connecting my ethanol sensor into the fuel return line, no cutting of hoses needed, due to luckily correctly positioned join in hose, remove it fit sensor all good. Flexi fuel set up all ready to go just needs a tune, easy.

/quote]

Was that the last piece of the puzzle?

Not really unfortunately the inside is still a long way from done, got to finish the rewire of car that\'s being done in the downtime of a company so I\'m getting a stupid cheap rate but I have to wait.

Got a oil thermostat coming next week need to plumb that in should be easy though and that\'s the engine bay completely ready to go. Rewire will take an age as ethanol sensor etc has to be wired in my digital dash too has to be installed. So bit to go yet.

[sti555]

 ADIKT']

[quote name='sti555 said:

will be interested to hear if you notice much difference.my guess is a tiny bit of lag but better top end

/quote]Will let you know when I pick her up!

looking forward to it

Have you picked her up yet?!

Oh god I miss that sound!!! :-[ your gonna love it bro hahahah

/quote]Not yet, hopefully some time today

I still have the factory exhaust so probably wont hear to much - hopefully my new downpipe will help with that

So I wont be picking car up till Tuesday (they been really busy!)

What sort of working were they doing to your car.lol Marc took my turbo,manifold,upipe off and replaced with new manifold and up pipe within a hour and top job too,no leaks or anything..haha almost same time it takes me to replace radiator hose

[ADIKT]

 sti555']

[quote name='sti555 said:

will be interested to hear if you notice much difference.my guess is a tiny bit of lag but better top end

/quote]Will let you know when I pick her up!

looking forward to it

Have you picked her up yet?!

Oh god I miss that sound!!! :-[ your gonna love it bro hahahah

/quote]Not yet, hopefully some time today

I still have the factory exhaust so probably wont hear to much - hopefully my new downpipe will help with that

So I wont be picking car up till Tuesday (they been really busy!)

What sort of working were they doing to your car.lol Marc took my turbo,manifold,upipe off and replaced with new manifold and up pipe within a hour and top job too,no leaks or anything..haha almost same time it takes me to replace radiator hose

my service was booked in for the Thursday. Then they picked up on a few other things which need to be done. Which they hant allocated time for due to being all booked up and busy. So they are finishing on Tuesday when they have some spare time.

[mattapo]

Dyno tune day, ended up with 222hp atw and 196.5Tq on a Plus T\'d 1800 mx5 engine in my 650KG Exocet.

Im happy enough for now.

[albaru]

Took out rear shocks because there is thumps from rear when you go over speed humps or any bumps actually. Right rear doesn\'t rebound at all. Think I\'ve found the problem. To be sent off for rebuild

[marc]

 boon']

[quote name='ADIKT said:

b]Both rocker cover gaskets leaking

Cracked up pipe [/b]

I could have told you these 2 things without even seeing the car

Find me a 15 year old Subaru with a non-leaking factory rocker cover gasket...

I dont know who does a genuine V7 STI shrtblock and leaves old gaskets to leak?? :

[Ninja8)]

Fitted front lip ;D added mesh to the bumper like the boss suggested

[ADIKT]

How does it fit spenc?

[Ninja8)]

 ADIKT said:

How does it fit spenc?

PURRRFECT! nothing had to be done apart from drilling the holes of course. White or black is the question now before paint on monday!

[ADIKT]

 Ninja 8)']

[quote name='ADIKT said:

How does it fit spenc?

/quote]

PURRRFECT! nothing had to be done apart from drilling the holes of course. White or black is the question now before paint on monday!

white. Don\'t do black.

[Ninja8)]

 ADIKT']

[quote name='ADIKT said:

How does it fit spenc?

/quote]

PURRRFECT! nothing had to be done apart from drilling the holes of course. White or black is the question now before paint on monday!

white. Don\'t do black.

Will get bosses opinion when i see him tomorrow for 4&rota drags! I wanted black/wannab carbon wrap

[ADIKT]

 Ninja 8)']

[quote name='ADIKT said:

How does it fit spenc?

/quote]

PURRRFECT! nothing had to be done apart from drilling the holes of course. White or black is the question now before paint on monday!

white. Don\'t do black.

Will get bosses opinion when i see him tomorrow for 4&rota drags! I wanted black/wannab carbon wrap

imo I reakon go white. But it\'s your car bro. Do what you like haha

[Ninja8)]

Always good to get opinions from others! Makes me think a bit more :-\