What have you done to your car today?

[QRAF]

 Wiretap']

[quote name='QRAF said:

found a leak in my air intake need to replace the joiner, making a loud i]sequel[/i] on boost.

Which one? Terminator Revelations, AvP Requiem, or something more sedate, say, Harry Potter 7?

funny man had to read it twice to pick up the mistake squeal better

[Joker]

sat down with insurance investigator and signed some forms

[LAtitudeNZ]

Got a wheel alignment, and 2 second hand tyres.

Everything was completely out of alignment, seems good now though.

And the tyres are purely for a month of running around until the car goes on storage for 6 months.

Then its 18x9.5 rota grids in hyper black. Counting down....

[slydog]

paid for my new racefab inlet! wount be here till the 4th of june!!! counting down hahah

[DRFVDR]

Fitted new boots to the cruiser

[Guest]

 LatitudeNZ said:

Got a wheel alignment, and 2 second hand tyres.

Everything was completely out of alignment, seems good now though.

And the tyres are purely for a month of running around until the car goes on storage for 6 months.

Then its 18x9.5 rota grids in hyper black. Counting down....

ive got 18x9.5rota grids in cosmic blue on my rs lol

[Guest]

i sent my intake for my single turbo conversion to the powder coater

[bubblz]

had a cunty day with the foz sounding sick..had a look at exhaust and it shat itself something wicked..the plus side was there was a second hand sti genome muffler at the shop and got that fitted up for a total of $150!..boom!!! happy chappy again

[ADIKT]

 bubblz said:

had a ***ty day with the foz sounding sick..had a look at exhaust and it shat itself something wicked..the plus side was there was a second hand sti genome muffler at the shop and got that fitted up for a total of $150!..boom!!! happy chappy again

score! haha

[Kiwi_Fozze]

Mean!!!

[Koom]

Sold my only road legal Subaru.

Pulled the trim off the rear of the RS and discovered how bad the rust problem has gotten while its been forgotten in storage.

[subi4snow]

Replaced wing mirror.

Strongs were on the ball again: paid yesterday, got mirror today at the other end of the country, right colour code and all.

[wrxguy]

Pulled the trim off the rear of the RS and discovered how bad the rust problem has gotten while its been forgotten in storage.

OWCH DUDE theres some work going on there!

[Koom]

Proves that if you ignore something for long enough, eventually you're going to regret ignoring it and then pay someone to fix it for ten times the amount of fixing the initial problem!

[subi4snow]

 Koom said:

Proves that if you ignore something for long enough, eventually you're going to regret ignoring it and then pay someone to fix it for ten times the amount of fixing the initial problem!

Agreed, sounds a lot like your talking about children though...

[wrxguy]

Stripping out REX for rollcage install.

Removed R/F door, R/F guard, all plastic covers and bits from behind guard, wiring loom from boot, rear washer bottle, sound deadning out of boot and half of interior (1.5 supermarket bags so far & 2 kg of dry ice), rear bumper, bottom half of dash, centre console, sunvisors, front seat belts, bonnet locking cables/latches, & ground off the rear seat hookup points below parcel tray.

Made a template out of cardboard and cutout of alloy a new panel to screw into centre console to mount 12v kill switch, engine start button, missile switch for anti lag, toggle switches .....

And the list of jobs to be done is still growing!

[94 Leone]

Torqued down the head.

[ADIKT]

 wrxguy said:

Stripping out REX for rollcage install.

Removed R/F door, R/F guard, all plastic covers and bits from behind guard, wiring loom from boot, rear washer bottle, sound deadning out of boot and half of interior (1.5 supermarket bags so far & 2 kg of dry ice), rear bumper, bottom half of dash, centre console, sunvisors, front seat belts, bonnet locking cables/latches, & ground off the rear seat hookup points below parcel tray.

Made a template out of cardboard and cutout of alloy a new panel to screw into centre console to mount 12v kill switch, engine start button, missile switch for anti lag, toggle switches .....

And the list of jobs to be done is still growing!

post some pics bro. like seeing progress being made

[wrxguy]

Dunno if this link will work but .... this is the folder I have some pics in. Let me know if it can be viewed.

http://www.facebook.com/brian.kirkwood.3?ref=tn_tnmn#!/media/set/?set=a.409568045721603.101387.100000052323255&type=3

[B4 2000]

on my way to pick her up

edit, put bout 100ks on new engine so far

[QIKSTI]

Been reading this thread for a while and never posted as actually never done anything till now.

Today removed 90% of my front end, fmic, drained the fluids and started to remove/disconnect alot of the pipes/hoses so when Mr Gazzy has time to come around and help me remove zee engine.

not much else is going to happen as off to the west coast for 2 weeks *sigh* just as i was starting to make progress, oh and sat in my front seat to remember the fun before i thought it was a good idea to strip it down and drive a house sized ford transit every day instead.

[Disruptz]

^^ @ QIKSTI this is a fun job , I did it with my average set of tools ;D ;D

rerouted a new oil cooler, after a large magpie or somthing dive bombed into the front while I was doing 100kmph on sh1.

Sorry! no pics eww

[rslegy]

it broke itself again F ing car

[Fastfour]

Found a hole in my gearbox casing. Explains the oil loss haha

[MercuryFree]

Passed a WOF, that's two for two on the STi, <3