What have you done to your car today?

[Swindog]

Washed both machines last night.

GTB definately needs a go over with cut and polish. Tar stains all over the show.

[boon]

Comprehensively fucked the motor in the Surf taking it in to the garage for a WoF check to see if it's worthwhile putting a new motor in it.

It died in the middle of the road outside the workshop. We had to push it in. Embarassing ;/

[petercad]

Installed Ichi's modified AVCS sensors - not too much of a job to do, 1hr 15 mins to do both.

Installing GPS tracker today - then drive it.....

[DRFVDR]

 boon said:

Comprehensively f***ed the motor in the Surf taking it in to the garage for a WoF check to see if it's worthwhile putting a new motor in it.

It died in the middle of the road outside the workshop. We had to push it in. Embarassing ;/

1UZ time

[boon]

 We are borg']

[quote name='boon said:

Comprehensively f***ed the motor in the Surf taking it in to the garage for a WoF check to see if it's worthwhile putting a new motor in it.

It died in the middle of the road outside the workshop. We had to push it in. Embarassing ;/

/quote]

1UZ time

5VZ actually Much, much easier swap. Block is basically the same shape so mounts, bellhousing blah blah bolt up.

[DRFVDR]

Is that the 3.5 V6 TRD do a bolt on charger for that too

[Dv8er - FSTWRX]

 boon']

[quote name='boon said:

Comprehensively f***ed the motor in the Surf taking it in to the garage for a WoF check to see if it's worthwhile putting a new motor in it.

It died in the middle of the road outside the workshop. We had to push it in. Embarassing ;/

/quote]

1UZ time

5VZ actually Much, much easier swap. Block is basically the same shape so mounts, bellhousing blah blah bolt up.

Yea but there are engine mount and bellhousing adapters available for the 1uz so they 'bolt up' aswell

Come on, you know you want to...

[boon]

 We are borg said:

Is that the 3.5 V6 TRD do a bolt on charger for that too

3.4, yeah... and I would crush/kill/destroy for one of those TRD charger kits, but they're apparently like hens teeth these days.

[Swindog]

 Dv8er - FSTWRX']

[quote name='boon said:

Comprehensively f***ed the motor in the Surf taking it in to the garage for a WoF check to see if it's worthwhile putting a new motor in it.

It died in the middle of the road outside the workshop. We had to push it in. Embarassing ;/

/quote]

1UZ time

Mounts for 1uz will cost you about 350. The bellhousing adaptors about the same if not 300. Easy peasy. Unless its a diesel.

5VZ actually Much, much easier swap. Block is basically the same shape so mounts, bellhousing blah blah bolt up.

Yea but there are engine mount and bellhousing adapters available for the 1uz so they 'bolt up' aswell

Come on, you know you want to...

[slydog]

picked up car form shop. nice new custom intercooler pipes all done!!

[Bazza-NZ]

I've put some plans in place so that i can get some major projects done over the summer... Should be a nice long summer in the sun hopefully for me.

exhaust modification

oil cooler install

ECU to be rewired

STI intake manifold to be modified and installed

plenty of work to do, hopefully enough weekends of sun to complete

[Jakee]

Christmas for my car. A big clean

[aim]

I did the same, blackened the plastics, washed and waxed the paint, leather conditioner for the seats, removed the wheels and took to them with some tyre shine and degreaser, detailer for the dash and door cards. vacuum for the carpet, degreaser for the struts and brakes, degreaser for the exhaust.

Ahh good few hours.

[Timmah]

 aim said:

I did the same, blackened the plastics, washed and waxed the paint, leather conditioner for the seats, removed the wheels and took to them with some tyre shine and degreaser, detailer for the dash and door cards. vacuum for the carpet, degreaser for the struts and brakes, degreaser for the exhaust.

Ahh good few hours.

Want to do that to my car ? :-P

[aim]

Wanna pay me?

[Slidesector]

 slydog said:

picked up car form shop. nice new custom intercooler pipes all done!!

Whats in ike i the way of lag with custom?? just doing the same thing right now lol

[slydog]

 Slidesector']

[quote name='slydog said:

picked up car form shop. nice new custom intercooler pipes all done!!

/quote]

Whats in ike i the way of lag with custom?? just doing the same thing right now lol

http://img249.imageshack.us/img249/5897/003uc.jpg

has yet to go back on dyno after new turbo

[Jimbob]

Wired up afm so it actually works. Will tidy up when I get a day off that isnt xmas/newyears. next up oil leak from turbo return line and coolant from around waterpump

Sent from my GT-S5570 using Tapatalk

[slyrwd]

Braided some more hoses on the RS, swaped the factory ECU for the new Possum Link and mounted the hand controller on the ash tray.. just need to put battery in the boot and wire it up, bleed brakes then with a lil luck fire her up n see how she goes...

[MercuryFree]

Non rusty door and seat adjuster mechanism fitted to corolla. Exhaust partially sorted

[Kiwi_Fozze]

cleaned all work rubbish out of the car. vacuum. re mounted sub. picked up some MINT seats for Nick_96_RSB, took to all the glass with a decent glass cleaner, cleaned up all the plastics, applied a uv block plactic conditioner. swapped tyres around, front to rear, feels like a totally different car now. and inside is sooo CLEAN!!!!!!!!!!

big wash and wax tomorrow

[bubblz]

had a rant and rage as got big crack through front windscreen ...just before im doing trip to wellies for xmas too >

[Nick_96_RSB]

 kwi_fozze said:

cleaned all work rubbish out of the car. vacuum. re mounted sub. picked up some MINT seats for Nick_96_RSB, took to all the glass with a decent glass cleaner, cleaned up all the plastics, applied a uv block plactic conditioner. swapped tyres around, front to rear, feels like a totally different car now. and inside is sooo CLEAN!!!!!!!!!!

big wash and wax tomorrow

CHURRRR!!!

thanks bruv, cant thank you enough!

i love how this club helps people is effing Capital O for Awesome!

i left my car in my carpark & got maggoted on my LAST night of work at current job, got a couple of weeks of R&R before i start at new job plenty of time to install new seats when they get here ;D

Much love to all my family & friend's in CHCH hope everyone down there is safe & sound with all the quakes yesterday arvo, Stay strong you'll get through it! if my 80+yo grandma who lives alone can handle the jandle, so can you!

[NTYCME]

now got a bride zeta ii for my drivers seat, its in at the moment but might take it out after new years etc and just keep as a trackday/event seat

[subiv5]

Cleaned car today!

Installed a small Mexican to keep an eye on things for me ;D