Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Getting rid of speed cut?


tydon

Recommended Posts

I have a Pivot speed meter you can have for a good price if you're interested. $50. It inserts in the speed wire and removes cut. Also provides digital speed reading and 0-100m 0-200m 0-400m times. It works well. Got up to 218kph on Pukekohe, and speed meter kept memory of highest attained speed for after the event. Recently removed from my car as no longer required.

Link to comment
Share on other sites

 funkytown']

[quote name='newsuba said:

Some NZ new came with speed cuts as well.

/quote]

nz new 04 BP outback, speed cut or not? has the 240km speedo. I havent been able to test it personally?

mate had a 05 h6 ob with 240k speedo nz new and he claimed to have got that to 220...

Link to comment
Share on other sites

 funkytown']

[quote name='newsuba said:

Some NZ new came with speed cuts as well.

/quote]

nz new 04 BP outback, speed cut or not? has the 240km speedo. I havent been able to test it personally?

Don't know, never driven a BP really, really fast.

If it's got a 240km/h speedo probably not limited.

My NZ new STi v6 had the speed limiter.

A friend's NZ new STi v7 no limiter.

Another friend's NZ new STi v8 was limited.

Don't remember what speedos they had.

Link to comment
Share on other sites

 Al_baru said:

I have a Pivot speed meter you can have for a good price if you're interested. $50. It inserts in the speed wire and removes cut. Also provides digital speed reading and 0-100m 0-200m 0-400m times. It works well. Got up to 218kph on Pukekohe, and speed meter kept memory of highest attained speed for after the event. Recently removed from my car as no longer required.

id be keen for this al. my gear ratios are different so have an incorrect speedo >:(

does it give the speed live?

Link to comment
Share on other sites

 tydon said:

hi a friend told me to get rid of speed cut u cut the wire going to ECU for vehicle speed sensor?? not sure if this is true or not or would cause any problems.

the answer is no. on your car, no speed signal to the factory ecu = very rough running

you need a pivot or similar device, or a change to the ecu tune

Link to comment
Share on other sites

 rex-leggy']

[quote name='Al_baru said:

I have a Pivot speed meter you can have for a good price if you're interested. $50. It inserts in the speed wire and removes cut. Also provides digital speed reading and 0-100m 0-200m 0-400m times. It works well. Got up to 218kph on Pukekohe, and speed meter kept memory of highest attained speed for after the event. Recently removed from my car as no longer required.

/quote]

id be keen for this al. my gear ratios are different so have an incorrect speedo >:(

does it give the speed live?

Hey Josh

Yes it reads speed live. Jared's quite right - if you're speedo's reading wrong then so will the speedmeter. Uses the same speed wire. You would have to be a bit of an electrical wizz to change the speedo pulses ie with PIC or PLC or something. Got any old Omron PLC's lying around? It's possible but whether you would want to spend the time or not to make it is the question.

Al

Link to comment
Share on other sites

 Al_baru']

[quote name='Al_baru said:

I have a Pivot speed meter you can have for a good price if you're interested. $50. It inserts in the speed wire and removes cut. Also provides digital speed reading and 0-100m 0-200m 0-400m times. It works well. Got up to 218kph on Pukekohe, and speed meter kept memory of highest attained speed for after the event. Recently removed from my car as no longer required.

/quote]

id be keen for this al. my gear ratios are different so have an incorrect speedo >:(

does it give the speed live?

Hey Josh

Yes it reads speed live. Jared's quite right - if you're speedo's reading wrong then so will the speedmeter. Uses the same speed wire. You would have to be a bit of an electrical wizz to change the speedo pulses ie with PIC or PLC or something. Got any old Omron PLC's lying around? It's possible but whether you would want to spend the time or not to make it is the question.

Al

My pivot speedo reads different speed than my analog/car speedo (pivot is accurate while the car speedo reads a bit higher)

I have tested it with different GPS units and pivot always the same as they are.

in saying this, i don't know how it was wired, as it was already fitted to the car when i got it

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...