What have you done to your car today?

[raijin]

 johnny5 said:

how does it go with normal pump fuel no meth?

a mild mannered 282wkw/530nm on pump 98

[Guest]

 raijin said:

a mild mannered 282wkw/530nm on pump 98

Tuned on the dyno or the road?

[scooby-wrx]

WOF time again...

[Johnnynz]

 raijin said:

No worries - indeed 10% meth added directly into the tank (assuming the fuel pipework and FPR has been selected for meth resistance as is the case here) adds huge potential for extra ignition advance. I prefer this approach over the extra hassle, weight and failure risk of a meth/water injection system

Super dumb question probably but you literally just 40l of fuel and dump 400 Mils of Meth in the tank as well?

And do you run seperate fuel maps in case you cant add meth?

[Guest]

 Johnnynz said:

Super dumb question probably but you literally just 40l of fuel and dump 400 Mils of Meth in the tank as well?

And do you run seperate fuel maps in case you cant add meth?

That wouldnt work you would have to run a flexi fuel sensor. Impossible to know how much is left in the tank.

[Johnnynz]

Ah ok, I have seen them mentioned but never looked into it.

Too Google!!!

[Guest]

Im guessing but that should work if i read correctly. Good idea just didnt seem practical to me so didnt look into it to far.

[94 Leone]

Drove it, god it is amazing! A fair bit different to the legacy, but man am I loving it! Best debt ever!

[raijin]

 evowrx said:

Tuned on the dyno or the road?

road of course - in the real world

[Doris]

well I havent done it quite yet, but hopefully these low offset 13x7's will fit under the gaurds...

[Doris]

no dice, needa modify more stuff...

[DacerX]

nothing wrong with that, ive been worse fitment rolling around chch. just put some bolt on flares

[Doris]

I ain't venturing out into my hood lookin dis whack!

they're on 25mm adapters because they have the stupid stud pattern. plan is to mill a 4x100 pcd into the rim and go from there.

[DacerX]

bro, dis will get da *****z. rimemba on itz gutz getz tha slutz

[rex7]

took 3 days to fix front turning clunking noise, replaced both cv, steering rack, lower arm bushes, at the end its lower arms bush bolt was loose......speechless!

[pedro]

rex7...Thats sounds like an interesting tail of woe..Tell us more..

..did you keep your "faulty" parts..?

[kamineko]

got personal with the sti-ra heads today after a year of busy. valves look great considering..

[BINKZ]

Put a genome strut brace in the GTB

[WRXER]

Polish and Wax over half the car...Took the whole afternoon, has come up very nice as past owner didn't do it all apart from a basic wash.

[Koom]

 WRXER said:

Polish and Wax over half the car...Took the whole afternoon, has come up very nice as past owner didn't do it all apart from a basic wash.

Was it advertised as "one careful lady owner" haha

[WRXER]

Lol don't even get me started , been giving her **** with her "shortcuts" which she advertised as the above. She was careful but OMG did she cheap out or what, one tyre is different from the others, rear boot will also need a respray as clear coat has a yellow tinge to it also...No major as I was getting that done anyhow when I get the sti spoiler back on again (told her all those years ago to keep it on haha).

Oh and a couple interior panels were just sitting in place until you touched them as the clips were snapped at somepoint but never fixed, fortunately Fastfour hooked me up with those bits so it was an easy fix.

Ah well gave me ammo for annoying the crap out of her as she was getting real grumpy with me on FB haha, just wait til I put the same Carbon Fibre bonnet on with a big scoop as Roccco on this one haha...Thinking of getting the Plate SashaG as dedication to an iconic pornstar.

When another good weekend comes, I have to hit the engine bay as that is in desperate need of a clean then onto interior lastly which isn't too bad tbh just the windows need a damn some focus.

Edited September 26, 2014 by WRXER

[Koom]

The car won't know what's hit it! Good to see it's getting some love.

Not sure about the carbon bonnet myself but it definitely suited the zerosports kit better with the rear spoiler IMO.

Check the inside of the tyres cause they were always close to the bottom spring nut too.

[WRXER]

Must admit haven't checked all angles, really do need the excuse to grab a jack and some axle stands to look under the car.

Haha yeah bonnet has mixed reaction , unsure if I will keep it with the zerosport front kit...thinking Sti Bumper/Grill and getting a Greddy Trust lip put on, if I do keep the zerosport kit it needs to come off and some good TLC as there is a ton of hairline cracks in the paint.

[Timmah]

TBH WRXER I think I scared her off at the one and only CS meet she came too.

[loner]

Partially wired in my new mapDCCD unit... hoping it will make me faster by a second or two... or three or four