Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

What have you done to your car today?


Guest keltik

Recommended Posts

Did you read the bit about the new engine?

Some additives clog up the cooling system but its not going to matter in this case. Sometimes additives can work a treat other times they dont work at all. Had a mate with a old 89 legy n/a that blew a h/g was using water in a big way he just fed it a tube of liquid copper every few months kept it going raped daily for almost 2 years before selling it as a paddock car still going. I personally think fix the problem though.

Link to comment
Share on other sites

 STiNGR']

Ohh dear what\'s the stop leak for

Lol the stop leak is for the rocker cover gasket on the drivers side, it\'s a little bit weepy so the stop leak means it doesn\'t smoke after long trips.

[quote name='funkytown said:

wife to be running errands = man time. ftw.

fella above.. 400whp will be beyond 440s and the vf22 imo

Couldn\'t agree more with you mate, have heard the VF22\'s start to run out past 350whp or so? It\'s probably more for a bit of fun now and to give me a fairly decent turbo to start off with.

Will tend to things like injectors etc as I go through the build process, dreading this as brand new injectors = $$

Still deciding what to do management-wise, link will be the go but plug-in or wire-in?

No labour involved in install lol I\'m an auto electrician

Might have to get around to making a build thread one day

Link to comment
Share on other sites

 Roo']

Ohh dear what\'s the stop leak for

Lol the stop leak is for the rocker cover gasket on the drivers side, it\'s a little bit weepy so the stop leak means it doesn\'t smoke after long trips.

[quote name='funkytown said:

wife to be running errands = man time. ftw.

fella above.. 400whp will be beyond 440s and the vf22 imo

/quote]

Couldn\'t agree more with you mate, have heard the VF22\'s start to run out past 350whp or so? It\'s probably more for a bit of fun now and to give me a fairly decent turbo to start off with.

Will tend to things like injectors etc as I go through the build process, dreading this as brand new injectors = $$

Still deciding what to do management-wise, link will be the go but plug-in or wire-in?

No labour involved in install lol I\'m an auto electrician

Might have to get around to making a build thread one day

First dibs on your ECU if you go Link :P

Link to comment
Share on other sites

 Codex said:

This is what it looks like when someone tries to use stop leak to fix head gasket problems:

......

..

Personally wouldn\'t ever use it after seeing that o-o regardless of the issue

That\'s what the horrible composite gaskets often look like when the engine gets torn apart.

Link to comment
Share on other sites

 Koom said:

I bet the inside of the radiator looks great too! :(

one of my recent motor changes came with that. the motor had been standing for ages so when i opened it up to do tiing belt water pump and pulleys i notice the water pump and thermo stat was jammed because of that shit. please people get it fixed properly

Link to comment
Share on other sites

 boon said:

Did an awesome eye-o-meter wheel alignment to make my car something approximating drivable until Macbilt opens again and takes all of my money.

If your really clever you can use a square of string around your car and measure the off the string to get toe set at zero

Link to comment
Share on other sites

 WRXONP said:

Over my small Xmas break I\'ve done a full tube fre on the front along with alot of other custom things

52F0EE1D-1B2C-4D96-B9A4-5DD1A2F9B36E-758

Drop the motor back in Tomorow :)

so that\'s what ya been doing instead of trolling on here. Looks good man.

Do you need a cert for that?

Link to comment
Share on other sites

 WRXONP said:

Cert ? What\'s that ?

Car isn\'t a road car lol hasn\'t been for some time now - she\'s dedicated to the track - the straight pipe exhaust and ride height says it all really

oh I see. So what ya driving for road car?
Link to comment
Share on other sites

 ADIKT']

[quote name='WRXONP said:

Cert ? What\'s that ?

Car isn\'t a road car lol hasn\'t been for some time now - she\'s dedicated to the track - the straight pipe exhaust and ride height says it all really

/quote]oh I see. So what ya driving for road car?

I\'ve got a hiace company van and mrs has a rb25 stagea

Sooooooo nearly got a 03 legacy wagon twin scroll - nearly loll

Link to comment
Share on other sites

That\'s the one, I thought a 4x4 and a A/4WD were the same thing.

Misjudged a corner/missed the turnoff and thought I could still swing it around, hit gravel with the poor back tyres that the car dealership was going to replace tomorrow, boom.

Link to comment
Share on other sites

 Divine said:

That\'s the one, I thought a 4x4 and a A/4WD were the same thing.

Misjudged a corner/missed the turnoff and thought I could still swing it around, hit gravel with the poor back tyres that the car dealership was going to replace tomorrow, boom.

f u c k that is shit! Bad luck dude
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...