Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Dumb Question Thread!


Jambun

Recommended Posts

 sti555 said:
Just wondering if wrx gc8 and legacy bc5 exhaust systems are the same length,would a aftermarket exhaust for a rs legacy fit my wrx.cheers

Wheel well sits differently iirc. GC/GF ones are cheap as anyway and would fit all the hangers dude.

Link to comment
Share on other sites

Fellas, i am in dire need of information. so i noticed coolant all over my engine bay the other day cause i saw steam coming from the engine. I havent got to the bottom of it yet but i just had a question. Ive noticed 2 coolant caps? in my GDB. are they the same thing? can i put coolant in either one? and how do i determine where the leak is?

Also i used to get knocks in my suspension but now the noise has transitioned into a creaking sound?

Im at a loss :(

Link to comment
Share on other sites

Fellas, i am in dire need of information. so i noticed coolant all over my engine bay the other day cause i saw steam coming from the engine. I havent got to the bottom of it yet but i just had a question. Ive noticed 2 coolant caps? in my GDB. are they the same thing? and how do i determine where the fault lies? :D

Also my suspension used to knock. now it creaks?ish

Im at a loss :(

#noob

Link to comment
Share on other sites

 stiguy said:
Fellas, i am in dire need of information. so i noticed coolant all over my engine bay the other day cause i saw steam coming from the engine. I havent got to the bottom of it yet but i just had a question. Ive noticed 2 coolant caps? in my GDB. are they the same thing? and how do i determine where the fault lies? :D

Also my suspension used to knock. now it creaks?ish

Im at a loss :(

#noob

One coolant cap on the top tank and another on the radiator itself? Look around for any leaks or splits. Especially on the side of the rad. Otherwise, get a pressure test done.

Suspension knocking could be that your sway bar bushes need a regrease or the struts themselves need a regrease.

Link to comment
Share on other sites

 stiguy said:
Fellas, i am in dire need of information. so i noticed coolant all over my engine bay the other day cause i saw steam coming from the engine. I havent got to the bottom of it yet but i just had a question. Ive noticed 2 coolant caps? in my GDB. are they the same thing? and how do i determine where the fault lies? :D

turbo? should be one cap on the header tank. if you have two caps, maybe your radiator has been replaced with a non-turbo variant (which is ok if the dimensions are the same)

maybe the relief under the radiator cap is venting straight into the engine bay during normal engine operation. if so run a second rubber hose from the radiator cap relief to the coolant overflow bottle

Link to comment
Share on other sites

 scylar said:
guys, my headlight has got some condensation on the inside and ive read that i need to reseal them.. question is which sealant do i need adn would it be available at repco or supercheap?

Before I sold my previous set of tail lights, I used a hair dryer to dry them out completely then I used some off the shelf silicone sealant and went over the areas that looked like where water would be getting through. It was a bit messy, but some fine grit sand paper + soapy water cleaned them up.

Link to comment
Share on other sites

  • Guest locked this topic
Guest
This topic is now closed to further replies.
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...