What have you done to your car today?

[Scoobydoo]

 sti8u said:

was the arc kit a straight bolt on or mods needed?

It was a straight bolt in kit. It came off a V7 so I knew it would fit. There are brackets where there are holes for bolts and they all lined up. Perfecto!

Also, as far as the ECU reflash goes, I will add that the baseline run was the 186kw figure (thin red line), so that was as the car came to them. Andre worked his magic and I come away with a 27kw gain at the high level (green line, 20 psi). The thick red line is the power at the low level. (200kw @ 15psi, selectable with EBC - high/low button)

[Timmah]

 Firenza said:

Looking mean, i love stealth intercoolers

+1010101011280239578023573907!!!!!

Couldn't agree more!!

[ODB]

 Shale said:

Doesn't mean a lot in one of those. It's not exactly a CTR. Gets the tiniest bit of extra grunt up the rev range, maybe. Then again, I just hate Dad's car Goes okay for what it is certainly.

It goes ok took for a spiritied drive last night. It's no wrx but got enough room and modern/reliable/economic.

My arguments for a ctr were denied.

[LAtitudeNZ]

Noticed my flat tyre.

Also found that i have no idea where my Tyre Iron and wheel nut adaptor has gone too.

FML

Time to walk to Repco...hopefully they have a wheel nut adaptor that fits mine, as i have no idea what brand they are.

EDIT. Ok my wheel nuts are round, with 6 indents in them, any idea how to get them off? i just tried with my tyre iron and it doesnt work.

They look exactly like those ones.

[Enervated]

 LatitudeNZ said:

Noticed my flat tyre.

Also found that i have no idea where my Tyre Iron and wheel nut adaptor has gone too.

FML

Time to walk to Repco...hopefully they have a wheel nut adaptor that fits mine, as i have no idea what brand they are.

EDIT. Ok my wheel nuts are round, with 6 indents in them, any idea how to get them off? i just tried with my tyre iron and it doesnt work.

Maybe see mag and turbo? idk.

[BLAZD]

A real good socket set should get them off

[Scoobydoo]

Spline nuts, just need a standard spline nut socket

http://www.trademe.co.nz/motors/car-parts-accessories/wheels-tyres/other/auction-379667229.htm

Lots of people have them, someone in your area might let you borrow theirs?

[LAtitudeNZ]

Cheers Scooby, now to go to repco and supercheap to see if they stock any...

[BLAZD]

They won't , CPA mag and turbo etc will

[subout]

replaced power steering pump, lowering springs and bolted on the wheels off the sti onto the RS30

[LAtitudeNZ]

Time to walk to Mag and Turbo.

[grego0o]

 Scoobydoo said:

Thanks to grego0o for all his help with the FMIC install.

By far the easiest FMIC install I've ever done! Genuine Brands ftw.

[WRXER]

I'd agree, my genuine trust lip was awesome. Straight fit with even both holes matching up completely with stock bumber, easiest lip ever to fit.

[johnny5]

rounded the nut on the dump pipe closest to drivers side will use a nut splitter tomoro to get it off............................. I Hope

[rskikn]

dyno tuned it for the hundredth time @ speed source

[LAtitudeNZ]

 rskikn said:

dyno tuned it for the hundredth time @ speed source

small image is small

[Scoobydoo]

LOL @ posting a thumbnail

[Guest]

Got my car tuned at STM

[nt_a_foz]

 xecuta said:

Got my car tuned at STM

what it make man?

[johnny5]

reinstalled radiator with new top tank upgraded clamps thought about goin silicone but nah

[BLAZD]

Got more PPG treats

[petrolheadjman]

 BLAZD said:

Got more PPG treats

fix my spacers fool

[CUDDAS]

 BLAZD said:

Got more PPG treats

Please be STRAIGHT CUT treat's 8)

[BLAZD]

 CUDDAS']

[quote name='BLAZD said:

Got more PPG treats

/quote]

Please be STRAIGHT CUT treat's 8)

Those treats are already in the car ! now have centre diff to match

[BLAZD]

 petrolheadjman']

[quote name='BLAZD said:

Got more PPG treats

/quote]

fix my spacers fool

Come over and I can lol