Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

What have you done to your car today?


Guest keltik

Recommended Posts

 mattapo']

[quote name='WRXONP said:

oh ok i def saw it when it was green with WRXONP plates on it :P

/quote]

I saw that quite a bit in tauranga when i was up there a year back

^ This

Clearly remember you boosting off from BP Maungatapu

Link to comment
Share on other sites

Got engine out, YUSS!!!

Got head off,(was some water in there :/ (probably condensation from the open inlet.)

Checked the other head for water, was none; went to tighten it back up, and snapped off a rocker cover bolt in there - yay D,: -

Took a photo; will upload soon.

Link to comment
Share on other sites

 94 Leone said:

Got engine out, YUSS!!!

Got head off,(was some water in there :/ (probably condensation from the open inlet.)

Checked the other head for water, was none; went to tighten it back up, and snapped off a rocker cover bolt in there - yay D,: -

Took a photo; will upload soon.

Got a screw extractor?

Link to comment
Share on other sites

Yeah After breaking a few bolts I have started using a torque wrench on every bolt,I have a generic torque table so it gives me a good idea as to how tight they should go.

I also had to spend some money on torque wrenches now have 4 so i can go from 10nm thru to 450nm and from 1/4" to 3/4" drive ( probably about $1000 worth of torque wrenches)

Link to comment
Share on other sites

I broke one rocker cover bolt on my RS when i did the headgaskets.

And that was using a torque wrench.

Thank christ it was not nipped in the bottom of the threads..

Used the old trick of drilling two small holes in the end of the bolt and used small screwdriver to remove..

Link to comment
Share on other sites

I said to dad maybe he should do the tightening from now on haha (especially with annoying finnicky little things-He has the wisdom of having broken it all before, so he knows their limits lol) but drill and Easy outs usually get them out hassle free.

Link to comment
Share on other sites

Picked up the RS from epically failing its first WOF in three years ;D

Now to make a start on the to do list.....

(Although most things on the list will be ticked off by just getting it certed)

Link to comment
Share on other sites

 resurrection.inc said:

changed the plugs in the sti well showed the mrs how to she was keen to do it. so she was able to do it easily. and this is a girl that says i like that blue car!!!!

I must acquire the tools and knowledge on how to change spark plugs if a female can do it.

Link to comment
Share on other sites

upgraded the 4l engine mounted meth injection tank to a 12l boot mounted tank, ordered the twinscroll sump,pickup etc will be here by the weekend, sorted a date for the power tune hoping the 2.25 breaks the 300kw mark easier than old 2.0

Link to comment
Share on other sites

Ordered new mirror to replace the one kicked off by drunk people a week or so ago.

Tried to decide whether tiny dent in bonnet from same people is worth getting fixed.

Found that one of the shocks in the rear of the foz is actually from a different vehicle and needs replacing anyway...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...